YS T 990 7-2014 Methods for chemical analysis of copper matte Part 7 Determination of cadmium content Atomic absorption spectrometry《冰铜化学分析方法 第7部分 镉量的测定 原子吸收光谱法.pdf

相关资源

YS T 649-2018 铜及铜合金挤制棒.pdf

YS T 679-2018 非本征半导体中少数载流子扩散长度的测试表面光电压法.pdf

YS T 662-2018 铜及铜合金挤制管.pdf

YS T 540.7-2018 钒化学分析方法第7部分：氧量的测定惰气熔融红外吸收法.pdf

YS T 988-2014 羧乙基锗倍半氧化物.pdf

YS T 540.5-2018 钒化学分析方法第5部分：杂质元素测定电感耦合等离子体原子发射光谱法.pdf

YS T 1288.3-2018 高纯锌化学分析方法第3部分：砷量的测定 氢化物发生-原子荧光光谱法.pdf

YS T 79-2018 硬质合金焊接刀片.pdf

YS T 584-2018 电极材料用铬、锆铜棒材.pdf

YS T 699-2018 铝电解用石墨化阴极炭块.pdf

猜你喜欢

GOST ISO 11643-2013 Leather Tests for colour fastness Method for determination of colour fastness of small samples to solvents《皮革 色牢度试验 耐小溶剂样品的色牢度测定方法》.pdf

GOST ISO 11644-2013 Leather Method of determination of adhesion of finish《皮革 涂层牢度的测定方法》.pdf

GOST ISO 1167-1-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1 General method《流体输送用热塑性塑料.pdf

GOST ISO 1167-2-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 2 Preparation of pipe test .pdf

GOST ISO 1167-3-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3 Preparation of components.pdf

GOST ISO 1167-4-2013 Thermoplastics pipes fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4 Preparation of assemblies.pdf

GOST ISO 11737-1-2012 Sterilization of medical devices Microbiological methods Part 1 Estimation of population of microorganisms on products《医疗器械灭菌 微生物法 第1部分 产品上微生物数量的估计》.pdf

GOST ISO 11737-2-2011 Sterilization of medical devices Microbiological methods Part 2 Tests of sterility performed in the validation of a sterilization process《医疗器械灭菌 微生物法 第2部分 用于验.pdf

GOST ISO 11746-2014 Rice Determination of biometric characteristics of kernels《稻米 谷物生物计量特性的测定》.pdf