DLA MIL-PRF-32192 5 (2)-2012 RESISTOR CHIP THERMAL (THERMISTOR) INSULATED NEGATIVE TEMPERATURE COEFFICIENT STYLE RCTN1206.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 4951-3-2001 High yield strength steel bars and sections - Part 3 Delivery conditions for thermomechanically-rolled steels《高屈服强度钢棒和型钢 第3部分：热机轧型钢的交货条件》.pdf

ISO 4955-2016 Heat-resistant steels《耐热钢》.pdf

ISO 496-1973 Driving and driven machines Shaft heights《主动和从动机器 轴高》.pdf

ISO 4960-2007 Cold-reduced carbon steel strip with a mass fraction of carbon over 0 25 %《碳含量大于0 25%的冷轧碳素钢带》.pdf

ISO 4967-2013 Steel - Determination of content of non-metallic inclusions - Micrographic method using standard diagrams《钢 非金属包含物含量测定 利用标准图表的显微照相法》.pdf

ISO 4968-1979 Steel Macrographic examination by sulfur print (Baumann method)《钢 硫印宏观检验法(波曼法)》.pdf

ISO 4969-2015 Steel - Etching method for macroscopic examination《钢材 宏观检验用蚀刻法》.pdf

ISO 497-1973 Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers《优先数系和化整值的优先数系的选用指南》.pdf

ISO 4970-1979 Steel Determination of total or effective thickness of thin surface-hardened layers《钢 薄表面硬化层的总深度或有效深度的测定》.pdf