E 171-1965 《铬合金绿色涂料 硫酸钡百分含量以及颜料中的不可溶硅酸材料含量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 8871-2-2003 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 2 Identification and characterization《非肠道及制药设备用弹性件 第2部分 鉴别和表征》.pdf

ISO 8871-3-2003 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 3 Determination of released-particle count《非肠道及制药设备用弹性件 第3部分 释放粒.pdf

ISO 8873-1-2006 Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 1 Material specifications《硬质泡沫塑料 用于热绝缘的喷涂聚氨酯泡沫塑料 第1部分 材料.pdf

ISO 8873-2-2007 Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 2 Application《硬质泡沫塑料 隔热喷涂的聚氨酯泡沫塑料 第2部分 应用》.pdf

ISO 8873-3-2007 Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 3 Test methods《硬质泡沫塑料 隔热喷涂的聚氨酯泡沫塑料 第3部分 试验方法》.pdf

ISO 8887-1-2017 Technical product documentation - Design for manufacturing assembling disassembling and end-of-life processing - Part 1 General concepts and req.pdf

ISO 8889-1988 Chromium ores and concentrates determination of aluminium content complexometric method《铬矿石和铬精矿 铝含量的测量 络合法》.pdf

ISO 8890-1988 Dense shaped refractory products determination of resistance to sulfuric acid《致密定型耐火制品 耐酸性的测定》.pdf

ISO 8893-1997 Forestry machinery - Portable brush-cutters and grass-trimmers - Engine performance and fuel consumption《林业机械 便携式割灌机和割草机 发动机的性能和燃料消耗》.pdf