1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Explosive atmospheresPart 7: Equipment protection by increased safety “e“BS EN IEC 60079-7:2015+A1:2018National forewordThis British Standard is the UK implementation of EN IEC 60079-7:2015+A1:2018. It is identical to I
2、EC 60079-7:2015, incorporating amendment 1:2017. It supersedes BS EN 60079-7:2015, which is withdrawn. It partially supersedes BS EN 6007915:2010, specifically the requirements for Type of Protection “nA”.The significance of the changes between this standard and BS EN 60079-7:2007 (for “ec”), and be
3、tween this standard and BS EN 60079-15:2010 (for “nA”) are listed in a table in the IEC foreword.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by I
4、EC amendment A1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee EXL/31, Equipment for explosive atmospheres.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all
5、 the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 51285 8ICS 29.260.20Compliance with a British Standard cannot confer immunity from legal obligations. This British
6、Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affected31 January 2017 Implementation of IEC Interpretation sheet Sep-tember 2016 in National Annex NA30 June 2018 Implementation of
7、IEC amendment 1:2017 with CENELEC endorsement A1:2018BRITISH STANDARDBS EN IEC 60079-7:2015+A1:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN IEC 60079-7:2015 +A1January 2018ICS 29.260.20CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC Ref. No. EN IEC 60079-7:2015
8、+A1:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Explosive atmospheres Part 7: Equipment protection by increased safety “e“ (IEC 60079-7:2015)Atmosphres explosives Partie 7: Protection de lquipement par scurit augmente “e“ (IEC 60079-7:2015)Ex
9、plosionsfhige Atmosphre Teil 7: Gerteschutz durch erhhte Sicherheit “e“ (IEC 60079-7:2015)This European Standard was approved by CENELEC on 20150731. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the sta
10、tus of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French,
11、 German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CENCENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belg
12、ium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden
13、, Switzerland, Turkey and the United Kingdom.English VersionEN IEC 60079-7:2015+A1:2018 (E) European forewordThe text of document 31/1182/FDIS, future edition 5 of IEC 60079-7, prepared by IEC/TC 31 “Equipment for explosive atmospheres“ was submitted to the IEC-CENELEC parallel vote and approved by
14、CENELEC as EN 60079-7:2015.The following dates are ixed: latest date by which the document has to be implemented atnational level by publication of an identical national standardor by endorsement(dop) 2016-06-11 latest date by which the national standards conlicting with thedocument have to be withd
15、rawn(dow) 2018-07-31This document supersedes EN 60079-7:2007.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights.This document has been pre
16、pared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document.Endorsement noticeThe text
17、of the International Standard IEC 60079-7:2015 was approved by CENELEC as a European Standard without any modiication.In the oficial version, for Bibliography, the following notes have to be added for the standards indicated:IEC/TS 60034-17 NOTE Harmonized as CLC/TS 60034-17.IEC 60034-18-41 NOTE Har
18、monized as EN 60034-18-41.IEC/TS 60034-25 NOTE Harmonized as CLC/TS 60034-25.IEC 60079-14 NOTE Harmonized as EN 60079-14.IEC 60079-17 NOTE Harmonized as EN 60079-17.IEC 60079-18 NOTE Harmonized as EN 60079-18.IEC 60079-20-1 NOTE Harmonized as EN 60079-20-1.IEC 60079-28 NOTE Harmonized as EN 60079-28
19、.IEC 60079-29-2 NOTE Harmonized as EN 60079-29-2.IEC 60079-30-2 NOTE Harmonized as EN 60079-30-2.IEC 60079-35-1 NOTE Harmonized as EN 60079-35-1.IEC 60086-1 NOTE Harmonized as EN 60086-1.IEC 60095-1 NOTE Harmonized as EN 60095-1.iiBS EN IEC 60079-7:2015+A1:2018 EN IEC 60079-7:2015+A1:2018 (E) IEC 60
20、364-5-55 NOTE Harmonized in EN 60364-5-55 series.IEC 60622 NOTE Harmonized as EN 60622.IEC 60623 NOTE Harmonized as EN 60623.IEC 60664-3 NOTE Harmonized as EN 60664-3.IEC 60927 NOTE Harmonized as EN 60927.IEC 61008-1 NOTE Harmonized as EN 61008-1.IEC 61056-1 NOTE Harmonized as EN 61056-1.IEC 61347-2
21、-1 NOTE Harmonized as EN 61347-2-1.IEC 61347-2-4 NOTE Harmonized as EN 61347-2-4.IEC 61347-2-7 NOTE Harmonized as EN 61347-2-7.IEC 61347-2-8 NOTE Harmonized as EN 61347-2-8.IEC 61347-2-9 NOTE Harmonized as EN 61347-2-9.IEC 61347-2-13 NOTE Harmonized as EN 61347-2-13.IEC 61951-1 NOTE Harmonized as EN
22、 61951-1.IEC 62013-1 NOTE Harmonized as EN 62013-1.ISO 13849-1 NOTE Harmonized as EN ISO 13849-1.Foreword to amendment A1The text of document 31/1301/CDV, future IEC 60079-7:2015/A1, prepared by IEC/TC 31 “Explosive atmospheres“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
23、as EN IEC 60079-7:2015/A1:2018.The following dates are ixed: latest date by which the document has to be implemented atnational level by publication of an identical national standardor by endorsement(dop) 2018-07-19 latest date by which the national standards conlicting with the document have to be
24、withdrawn(dow) 2021-01-19Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.This document has been prepared under a mandate given to CENELEC by the E
25、uropean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document.Endorsement noticeiiiBS EN IEC 60079-7:2015+A1:2018 The text of the Intern
26、ational Standard IEC 60079-7:2015/A1:2017 was approved by CENELEC as a European Standard without any modiication.Annex ZA(normative)Normative references to international publications with their corresponding European publicationsThe following documents, in whole or in part, are normatively reference
27、d in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.NOTE 1 When an International Publication has been modiied by common modiication
28、s, indicated by (mod), the relevant EN/HD applies.NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.euPublication Year Title EN/HD YearIEC 60034-1 Rotating electrical machines Part 1: Rating and performanceEN 60034-1 IE
29、C 60044-6 Instrument transformers Part 6: Requirements for protective current transformers for transient performanceEN 60044-6 IEC 60061-1 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp capsEN 60061-1 IEC 60061-2 Lamp caps and holders togethe
30、r with gauges for the control of interchangeability and safety Part 2: LampholdersEN 60061-2 IEC 60064 Tungsten ilament lamps for domestic and similar general lighting purposes - Performance require-mentsEN 60064 IEC 60068-2-6 Environmental testing Part 2-6: Tests - Test Fc: Vibration (sinusoidal)EN
31、 60068-2-6 IEC 60068-2-27 2008 Environmental testing Part 2-27: Tests - Test Ea and guidance: ShockEN 60068-2-27 2009IEC 60068-2-42 Environmental testing Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connectionsEN 60068-2-42 IEC 60079-0 Explosive atmospheres Part 0: Equipment - G
32、ener-al requirementsEN 60079-0 IEC 60079-1 Explosive atmospheres Part 1: Equipment protec-tion by lameproof enclosures “d“EN 60079-1 IEC 60079-11 Explosive atmospheres Part 11: Equipment protec-tion by intrinsic safety “i“EN 60079-11 IEC 60079-30-1 Explosive atmospheres Part 30-1: Electrical resist-
33、ance trace heating - General and testing requirementsEN 60079-30-1 vBS EN IEC 60079-7:2015+A1:2018 EN IEC 60079-7:2015+A1:2018 (E) EN IEC 60079-7:2015+A1:2018 (E) Publication Year Title EN/HD YearIEC 60085 Electrical insulation - Thermal evaluation and desig-nationEN 60085 IEC 60112 Method for the d
34、etermination of the proof and the comparative tracking indices of solid insulating ma-terialsEN 60112 IEC 60216-1 Electrical insulating materials - Thermal endurance properties Part 1: Ageing procedures and evalua-tion of test resultsEN 60216-1 IEC 60216-2 Electrical insulating materials - Thermal e
35、ndurance properties Part 2: Determination of thermal en-durance properties of electrical insulating materials - Choice of test criteriaEN 60216-2 IEC 60228 Conductors of insulated cables EN 60228 IEC 60238 Edison screw lampholders EN 60238 IEC 60317-3 2004 Speciications for particular types of +A1 2
36、010 winding wires Part 3: Polyester enamelled round copper wire, class 155IEC 60317-8 Speciications for particular types of winding wires Part 8: Polyesterimide enamelled round copper wire, class 180EN 60317-8 IEC 60317-13 Speciications for particular types of winding wires Part 13: Polyester or pol
37、yesterimide overcoated with polyamide-imide enamelled round copper wire, class 200EN 60317-13 IEC 60317-46 Speciications for particular types of winding wires Part 46: Aromatic polyimide enamelled round copper wire, class 240EN 60317-46 IEC 60400 Lampholders for tubular luorescent lamps and star-ter
38、holdersEN 60400 IEC 60432-1 Incandescent lamps - Safety speciications Part 1: Tungsten ilament lamps for domestic and similar general lighting purposesEN 60432-1 IEC 60432-2 Incandescent lamps - Safety speciications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposesEN
39、60432-2 IEC 60432-3 Incandescent lamps - Safety speciications - Part 3: Tungsten halogen lamps (non-vehicle)EN 60432-3 IEC 60529 Degrees of protection provided by enclosures (IP Code) IEC 60598-1 Luminaires Part 1: General requirements and tests EN 60598-1 IEC 60664-1 Insulation coordination for equ
40、ipment within low-voltage systems Part 1: Principles, require-ments and testsEN 60664-1 viBS EN IEC 60079-7:2015+A1:2018 Publication Year Title EN/HD YearIEC 60947-1 Low-voltage switchgear and controlgear Part 1: General rulesEN 60947-1 IEC 60947-7-1 Low-voltage switchgear and controlgear Part 7-1:
41、Ancillary equipment - Terminal blocks for copper conductorsEN 60947-7-1 IEC 60947-7-2 Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductorsEN 60947-7-2 IEC 60947-7-4 Low-voltage switchgear and controlgear Part 7-4: Ancillary
42、 equipment - PCB terminal blocks for copper conductorsEN 60947-7-4 IEC 60998-2-4 Connecting devices for low voltage circuits for house-hold and similar purposes Part 2-4: Particular requirements for twist-on connecting devicesEN 60998-2-4 IEC 60999-1 Connecting devices - Electrical copper conductors
43、 - Safety requirements for screw-type and screw-less-type clamping units Part 1: General require-ments and particular requirements for clamping units for conductors from 0,2 mm2up to 35 mm2(included)EN 60999-1 IEC 60999-2 Connecting devices - Electrical copper conductors - Safety requirements for sc
44、rew-type and screw-less-type clamping units Part 2: Particular re-quirements for clamping units for conductors above 35 mm2up to 300 mm2(included)EN 60999-2 IEC 61184 Bayonet lampholders EN 61184 IEC 61195 Double-capped luorescent lamps - Safety speciica-tionsEN 61195 IEC 61347-1 Lamp controlgear -
45、Part 1: General and safety re-quirementEN 61347-1 IEC 61347-2-3 Lamp controlgear Part 2-3: Particular require-ments for a.c. and/or d.c. supplied electronic control gear for luorescent lampsEN 61347-2-3 IEC 62035 Discharge lamps (excluding luorescent lamps) - Safe-ty speciicationsEN 62035 ISO 178 Pl
46、astics - Determination of lexural properties EN ISO 178 ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plasticsEN ISO 527-2 ISO 2859-1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance qual
47、ity limit (AQL) for lot-by-lot inspection viiBS EN IEC 60079-7:2015+A1:2018 EN IEC 60079-7:2015+A1:2018 (E) EN IEC 60079-7:2015+A1:2018 (E) Annex ZZ(informative)Relationship between this European standard and the essential requirements of 2014/34/EU 2014 OJ L96 aimed to be coveredThis European Stand
48、ard has been prepared under a Commissions standardisation request M/BC/CEN/92/46 to provide one voluntary means of conforming to essential requirements of 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to eq
49、uipment and protective systems intended for use in potentially explosive atmospheres (recast).Once this standard is cited in the Oficial Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumption of conform
