1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014) BS EN ISO 10239:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10239 August 2017 ICS 47.080 Supersedes EN ISO 10239:2014English Version
2、Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014) Petits navires - Installations alimentes en gaz de ptrole liqufis (GPL) (ISO 10239:2014) Kleine Wasserfahrzeuge - Flssiggas-Anlagen (LPG) (ISO 10239:2014) This European Standard was approved by CEN on 16 July 2017. CEN members are
3、bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to th
4、e CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Cent
5、re has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani
6、a, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 1
7、7, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10239:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 10239:2017. It is identical to ISO 10239:2014. It supersedes BS EN IS
8、O 10239:2014, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GME/33, Small craft.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provision
9、s of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 96511 1ICS 97.100.20; 47.080Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was pub
10、lished under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 10239:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10239 August 2017 ICS 47.080 Supersedes EN ISO 10
11、239:2014English Version Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014) Petits navires - Installations alimentes en gaz de ptrole liqufis (GPL) (ISO 10239:2014) Kleine Wasserfahrzeuge - Flssiggas-Anlagen (LPG) (ISO 10239:2014) This European Standard was approved by CEN on 16 Jul
12、y 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtai
13、ned on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN
14、-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,
15、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management
16、 Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10239:2017 EBS EN ISO 10239:2017EN ISO 10239:2017 (E) 3 European foreword The text of ISO 10239:2014 has been prepared by Technical
17、 Committee ISO/TC 188 “Small craft” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10239:2017. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Februa
18、ry 2018, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This d
19、ocument supersedes EN ISO 10239:2014. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an
20、integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Re
21、public of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10239:2014 h
22、as been approved by CEN as EN ISO 10239:2017 without any modification. BS EN ISO 10239:2017EN ISO 10239:2017 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2013/53/EU This European standard has been prepared under a mandate giv
23、en to CEN by the European Commission to provide one means of conforming to Essential Requirements of the New Approach Directive 2013/53/EU. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one m
24、ember state, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1 Correspondence between
25、this European Standard and Directive 2013/53/EU Clauses/sub-clauses of this European Standard Essential requirements (ERs) of EU Directive 2013/53/EU Comments 1, 2, 3, 4, 5, 6, 7, 8 ,9 ,10, 11, 13, Annex A, Annex B, Annex D I.A.5.5 Gas System This standard satisfies the legal requirements of this es
26、sential requirement in respect of Liquid Petroleum Gas systems. Attention shall be paid to the limitations set out in the scope in respect of its application to propulsion engines, generators and commissioning of installations. An appliance shall be used for the application intended by the manufactu
27、rer and installed in accordance with the manufacturers instructions in accordance with clause 7.1; there is no specific legal requirement for appliances to be equipped with a flame failure device effective on all burners (clause 7.3) although they may be provided by the manufacturer. Annex D applies
28、 in respect of cooking appliances with integral LPG cartridges with a capacity of 225 g or less. BS EN ISO 10239:2017EN ISO 10239:2017 (E) 5 The use of a pressure gauge in the high pressure side of the system will not detect cylinder valve let by or creep which, if suspected, should be tested for se
29、parately. Clause 6.5, 7.7, 7.9, Annex C, Annex D 1.A.5.6.1 - Fire protection, general Annex D applies in respect of cooking appliances with integral LPG cartridges with a capacity of 225 g or less. Clause 12, Annex C, Annex D.9 1.A.2.5 - Owners manual Annex D applies in respect of cooking appliances
30、 with integral LPG cartridges with a capacity of 225 g or less. WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 10239:2017ISO 10239:2014(E)Contents PageForeword ivIntroduction v1 Scope . 12 Normative referen
31、ces 13 Terms and definitions . 24 General provisions 35 Pressure regulation device 46 LPG supply line . 56.1 General . 56.2 Piping 56.3 Hoses and hose lines 66.4 Materials . 66.5 Installation 66.6 Shut-off valves . 77 Appliances . 88 Location and installation of LPG cylinders 99 Ventilation . 910 LP
32、G installation tightness tests 1011 Ignition protection from electrical devices .1012 Owners manual1013 Ducts and flues for air intake and combustion product discharge .10Annex A (informative) Design guidelines for pressure drop due to pipe resistance 12Annex B (normative) Ventilation.13Annex C (nor
33、mative) Instructions to be included with the owners manual .14Annex D (normative) Cooking appliances with integral LPG cartridges with a capacity of 225 g or less 16Bibliography .17 ISO 2014 All rights reserved iiiBS EN ISO 10239:2017ISO 10239:2014(E)ForewordISO (the International Organization for S
34、tandardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the ri
35、ght to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedure
36、s used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial ru
37、les of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified
38、during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meanin
39、g of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 188,
40、Small craft.This third edition cancels and replaces the second edition (ISO 10239:2008), which has been technically revised. The major technical changes include: suitable user and manufacturer checks of the LPG system tightness; specifying a suitable hose material; describing the information to be p
41、rovided in the owners manual; clarification on LPG powered fuel cells included or excluded from standard.iv ISO 2014 All rights reservedBS EN ISO 10239:2017ISO 10239:2014(E)IntroductionThis International Standard does not contain procedures for commissioning new LPG installations or system maintenan
42、ce or upgrades. Competent persons responsible for commissioning LPG installations should use relevant national codes and procedures appropriate to the country concerned. ISO 2014 All rights reserved vBS EN ISO 10239:2017BS EN ISO 10239:2017Small craft Liquefied petroleum gas (LPG) systems1 ScopeThis
43、 International Standard covers the installation of permanently installed liquefied petroleum gas LPG systems and LPG burning appliances on small craft of up to 24 m length of hull.It does not cover devices used for LPG-fuelled propulsion engines or LPG-driven generators.This International Standard c
44、overs cooking appliances with internal LPG cartridges, with a capacity of 225 g or less (See Annex D).It covers storage of all LPG cylinders but is not intended to regulate the technical requirements for such cylinders that are subject to national regulationsIt does not contain procedures for commis
45、sioning the LPG installation.NOTE New designs, materials and methods of assembly giving at least equivalent results can be considered to be complying with the requirements of this International Standard when approved by a relevant body.2 Normative referencesThe following documents, in whole or in pa
46、rt, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 7-1, Pipe threads where pressure-tight joints
47、are made on the threads Part 1: Dimensions, tolerances and designationISO 8434-1:2007, Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectorsISO 8846, Small craft Electrical devices Protection against ignition of surrounding flammable gasesISO 90941), Small craft
48、 Fire protectionISO 10133, Small craft Electrical systems Extra-low-voltage d.c. installationsISO 10240, Small craft Owners manualISO 12217-1, Small craft Stability and buoyancy assessment and categorization Part 1: Non-sailing boats of hull length greater than or equal to 6 mISO 13297, Small craft
49、Electrical systems Alternating current installationsEN 751-2, Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water Part 2: Non-hardening jointing compoundsEN 751-3, Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water Part 3: Unsintered PTFE tapesEN 1254-2, Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubesEN 1949, Specification for the inst
