MNOSZ 10630-1953 《土地无需松动挖掘管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 7527-3-1971 Steel Forgings Machining Allowances and Permissble Variations for Seamless Open-die Forged Rings《钢锻件 无缝开式模锻环形件的加工余量和允许偏差》.pdf

DIN 7527-4-1972 Steel Forgings Machining Allowances and Permissible Variations for Seamless Open-die Forged Bushes《钢锻件 自由锻造的套筒的加工余量及允许偏差》.pdf

DIN 7527-5-1972 Steel Forgings Machining Allowances and Permissible Variations for Open-die Forged Rolled and Welded Rings《钢锻件 自由锻造的轧制及焊接圆环的加工余量及允许偏差》.pdf

DIN 7527-6-1975 Steel Forgings Machining Allowances and Permissible Variations for Open-die Forged Bars《钢锻件 第6部分 开式锻模锻造的棒材加工余量和允许变量》.pdf

DIN 7540-1980 Eye hooks grade 5《5级环钩 》.pdf

DIN 7541-1984 Lifting appliances large-eye hooks grade 5《提升设备 大孔环挂钩 5级》.pdf

DIN 76-1-2016 Thread run-outs and thread undercuts - Part 1 For ISO metric threads in accordance with DIN 13-1《符合DIN 13-1的ISO米制螺纹的螺纹尾部和螺纹切槽》.pdf

DIN 76-2-1984 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1《与ISO 228 第1部分相符的管螺纹的螺纹收尾和空刀槽》.pdf

DIN 76-3-1977 Runouts Undercuts for Trapezoidal Threads Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch《梯形螺纹、斜梯形螺纹和圆螺纹以及其他粗牙螺纹的螺纹尾部和螺纹退刀槽》.pdf