MNOSZ 11740-1952 《矿物油产品爆破含量定义 普通内容》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SMS 1492-1950 《仪器，砖体结构，球型，公差最大，标准直径18至180》.pdf

SIS SMS 1493-1950 《仪器，螺纹公差最小，参考最小，最大和新高，标准，标准直径1至20》.pdf

SIS SMS 1494-1950 《仪表，螺纹，公差最大，参考最小最大和磨损最大，标准直径超过1至20》.pdf

SIS SMS 1495-1950 《仪器，螺纹公差最小，参考最小和最大，普通标准内直径18-180》.pdf

SIS SMS 1496-1950 《仪表，螺纹，公差最大，参考最小最大和磨损最大，标准内直径超过18至180》.pdf

SIS SMS 1497-1950 《仪表，筒内》.pdf

SIS SMS 1498-1950 《仪表，轴内螺纹》.pdf

SIS SMS 1499-1950 《仪表，夹头》.pdf

SIS SMS 15-1930 《孔环流 型号LH M线》.pdf