MNOSZ 1345-1952 《平边火钳》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM EN 20811-1993 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test《纺织品 抗水透性测定 水压试验》.pdf

ONORM EN 2082-1-1993 Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 1 General requirements《航空航天系列 铝合金锻坯和锻件 技术规范 第1部分：一般要求》.pdf

ONORM EN 20865-1992 Slots in platens for projection welding machines《凸焊机台板槽》.pdf

ONORM EN 2089-1994 Aerospace series Aluminium alloy AL-P2014A-T6 or T62 Sheet and strip 0 4 mm or = a or = 6 mm《航空航天系列 铝合金AL-P2014A-T6或者 T62 0 4 mm a 6 mm的板和条》.pdf

ONORM EN 20898 Teil 2-1991 Mechanicalproperties of fasteners -Nuts with specified proof load values《紧固件机械性能 具有规定检验荷载值的螺母》.pdf

ONORM EN 20898-1-1991 Mechanical properties of fasteners -Bolts screws and studs《紧固件的机械性能 螺栓、螺钉及柱头螺栓》.pdf

ONORM EN 20898-6-1993 Mechanical properties of fasteners - Nuts with specified proof load values - Fine pitch thread Status as of 1989《紧固件的机械性能 具有规定检验荷载值的螺母 细牙螺纹，1989年的状况》.pdf

ONORM EN 209-1986 Steel drums open (removable) head drums with a total capacity of 213 litres《钢桶；总容量为213升的带可挪开盖的鼓形桶》.pdf

ONORM EN 2092-1994 Aerospace series Aluminium alloy AL-P7075-T6 or T62 Clad sheet and strip 0 4 mm or = a or = 6 mm《航空航天系列 铝合金AL－P7075－T6或者 T62-0 4 mm a 6 mm的包覆板和条》.pdf