MNOSZ 14659-1955 《医疗设备 检查和手术椅》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS A 297-1987 Specification for internal drive offset cruciform recess (Torq-Set(R)) for rotary fastening devices - Metric series《旋转式紧固装置的偏位十字形槽内驱动规范 公制系列》.pdf

BS A 304-1994 Bolts normal bihexagonal head normal or pitch diameter shank long length MJ threads metallic material coated or uncoated strength classes less than or equal to 1100 M.pdf

BS A 305-1994 Bolts - Test methods《螺栓 试验方法》.pdf

BS A 306-1994 Rivets solid universal head metallic material with or without surface treatment - Dimensions《经过表面处理或没经过表面处理由金属材料制成的万能头实心铆钉 尺寸》.pdf

BS A 307-1994 Bolts normal spline head normal or pitch diameter shank long length MJ threads metallic material coated or uncoated strength classes less than or equal to 1100 MPa Di.pdf

BS A 309-1994 Bolts large hexagonal head normal or pitch diameter shank long length MJ threads metallic material coated or uncoated strength classes less than or equal to 1100 MPa .pdf

BS A 316-1997 Nuts hexagonal slotted (castellated) normal height normal across flats with MJ threads classifications - 600 MPa (at ambient temperature) 120 C 600 MPa (at ambient te.pdf

BS A 318-1997 Nuts hexagonal slotted (castellated) reduced height reduced across flats with MJ threads classifications - 450 MPa (at ambient temperature) 425 C 600 MPa (at ambient .pdf

BS A 319-1997 Nuts hexagonal plain reduced height reduced across flats with MJ threads classifications 450 MPa (at ambient temperature) 425 C 600 MPa (at ambient temperature) 235 C.pdf