MNOSZ 14711-1953 《实验室用搪瓷工具 量杯》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A302 A302M-2017 Standard Specification for Pressure Vessel Plates Alloy Steel Manganese-Molybdenum and Manganese-Molybdenum-Nickel《压力容器用锰钼和锰钼镍合金钢板的标准规格》.pdf

ASTM A304-2005(2011) Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements《有末端淬火淬透性要求的碳和合金钢棒材的标准规范》.pdf

ASTM A304-2005e2 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements《有顶端淬火硬性要求的碳钢及合金钢棒材的标准规范》.pdf

ASTM A304-2011 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements《碳钢和合金钢筋末端淬透性要求的标准规格》.pdf

ASTM A304-2016 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements《有末端淬火淬透性要求的合金钢棒材的标准规格》.pdf

ASTM A307-2007a Standard Specification for Carbon Steel Bolts and Studs 60 000 PSI Tensile Strength《抗拉强度为60000PSI的碳素钢螺栓和螺柱的标准规范》.pdf

ASTM A307-2007b Standard Specification for Carbon Steel Bolts and Studs 60 000 PSI Tensile Strength《抗拉强度为60000PSI的碳素钢螺栓和螺柱的标准规范》.pdf

ASTM A307-2010 Standard Specification for Carbon Steel Bolts and Studs 60 000 PSI Tensile Strength《抗拉强度为60000 PSI的碳素钢螺栓和螺柱的标准规格》.pdf

ASTM A307-2012 Standard Specification for Carbon Steel Bolts Studs and Threaded Rod 60&x2009 000 PSI Tensile Strength《抗拉强度为60000 PSI的碳钢螺栓、螺柱和螺杆的标准规格》.pdf