MNOSZ 15313-1953 R 《内部排水设备，道路下面的管道》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JIS K 7209-2000 Plastics -- Determination of water absorption《塑料 吸水率的测定》.pdf

JIS K 7210-1-2014 8750 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1 Standard method《塑料.pdf

JIS K 7210-2-2014 0000 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 2 Method for materia.pdf

JIS K 7211-1-2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1 Non-instrumented impact testing《塑料 硬质塑料耐冲孔性能的测定 第1部分 非仪器冲击试.pdf

JIS K 7211-2-2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2 Instrumented impact testing《塑料 硬质塑料冲孔性能的测定 第2部分 仪器冲击试验》.pdf

JIS K 7212-1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method《塑料 热塑性塑料热稳定性的测定 烘箱法》.pdf

JIS K 7216-1980 Testing method for brittleness temperature of plastics《塑料脆化温度的测试方法》.pdf

JIS K 7219-1=2011 5625 Plastics -- Methods of exposure to solar radiation -- Part 1 General guidance《塑料 日光照射暴露法 第1部分 一般指南》.pdf

JIS K 7219-2-2011 6250 Plastics -- Methods of exposure to solar radiation -- Part 2 Direct weathering and exposure behind window glass《塑料 日光照射暴露法 第2部分 直接风化和窗玻璃后.pdf