MNOSZ 1535-1951 《圆尾翼工具框架》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2422-2017 Standard Digital Reference Images for Inspection of Aluminum Castings《铝铸件检验用标准数字参考图像》.pdf

ASTM E2425-2005 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers《动态机械分析仪损耗模量一致性的标准试验方法》.pdf

ASTM E2425-2011 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers《动态机械分析仪损耗模量一致性的标准试验方法》.pdf

ASTM E2425-2016 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers《动态机械分析仪的损耗模量一致性的标准试验方法》.pdf

ASTM E2426-2005 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS《用SIMS测量同位素比率对脉冲计算系统死时间测定的标准实施规程》.pdf

ASTM E2426-2010 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS《通过用次级离子质谱法测量同位素比率对脉冲计算系统死时间测定的标准实施规程》.pdf

ASTM E2427-2005 Standard Test Method for Acceptance by Performance Testing of U S Standard Test Sieves《用美国标准试验筛的性能测试进行验收用标准试验方法》.pdf

ASTM E2427-2011 Standard Test Method for Acceptance by Performance Testing for Sieves《验收筛的性能测试的标准试验方法》.pdf

ASTM E2427-2013 Standard Test Method for Acceptance by Performance Testing for Sieves《对筛的性能测试进行验收用标准试验方法》.pdf