MNOSZ 15539-1953 《手术设备普莱费尔切刀》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 16999-2003 Wood-based panels - Sampling and cutting of test pieces《木质板材 试样的抽取和剪切》.pdf

ISO 17-1973 Guide to the use of preferred numbers and of series of preferred numbers《优先数和优先数系的应用指南》.pdf

ISO 1700-1988 Cinematography 8 mm type S motion-picture raw stock film cutting and perforating dimensions《电影 超8mm电影生胶片 裁切和打孔尺寸》.pdf

ISO 1701-1-2004 Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1 Machines with horizontal spindle《立式和卧式升降台铣.pdf

ISO 1701-2-2004 Test conditions for milling machines with table of variable height - Testing of accuracy - Part 2 Machines with vertical spindle《立式和卧式升降台铣床检验条件 .pdf

ISO 17052-2007 Rubber raw - Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography - Thermal desorpt.pdf

ISO 17054-2010 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique《用X射线荧光光谱法(XRF)近似技术分析高合金钢的常规.pdf

ISO 17057-1999 Aerospace - Rivets solid - Test method《航空航天 实心铆钉 试验方法》.pdf

ISO 17059-2007 Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)《含油种子 .pdf