MNOSZ 15648-1954 《放火设备检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 20104-1974 Steel pattern plates for moulding boxes having inside dimensions 1200x1000 mm for moulding foundry machines without turn of half mould without squeezing Design and .pdf

GOST 20106-1974 Steel pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm for moulding foundry machines without turn of half mould w.pdf

GOST 20108-1974 Steel pattern plates with changeable metal inserts for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines without turn of half mould w.pdf

GOST 20110-1974 Steel pattern plates with changeable metal insets for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines without turn of half mould w.pdf

GOST 20111-1974 Steel pattern plates moulding boxes having inside dimensions 600x500 mm 800x700 mm 1000x800 mm for moulding foundry machines with turn of half mould with squeezing .pdf

GOST 20112-1974 Steel pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm 800x700 mm 1000x800 mm for moulding foundry machines with dime.pdf

GOST 20113-1974 Steel pattern plates for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould without squeezing Design and dimen.pdf

GOST 20114-1974 Steel pattern plates with changeable metal insets for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould with .pdf

GOST 20115-1974 Steel pattern plates for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines with turn of half mould without squeezing Design and dime.pdf