MNOSZ 20104-1954 《船的安装，设备，存货仓和运行的材料概念》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NBN-EN 10027-1-1992 2500 Designation systems for steel - Part 1 Steel names principal symbols《钢的命名体系 第1部分：钢号，主符号》.pdf

NBN-EN 10027-2-1992 1875 Designation systems for steels - Part 2 Numerical system《钢的命名体系 第2部分：数制》.pdf

NBN-EN 10028-1-1993 6250 Flat products made of steels for pressure purposes Part 1 General requirements《压力容器用的钢板制品 第1部分：一般要求》.pdf

NBN-EN 10028-2-1993 Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels with specified elevated temperature properties《压力容器用的扁平钢轧材 第2部分：具有规定的耐高温性能的.pdf

NBN-EN 10028-3-1993 8125 Flat products made of steels for pressure purposes Part 3 Weldable fine grain steels normalized《压力容器用的扁平钢轧材 第2部分：经过正火处理的可焊细粒钢》.pdf

NBN-EN 10028-4-1995 1875 Flat products made of steels for pressure purposes - Part 4 Nickel alloy steels with specified low temperature properties《压力容器用的扁平钢轧材 第4部分：具有规定的低温特性的镍合金钢》.pdf

NBN-EN 10034-1994 1875 Structural steel I and H sections Tolerances on shape and dimensions《工字型和H型结构钢 形状和尺寸公差》.pdf

NBN-EN 10036-1992 4375 Chemical analysis of ferrous materials Determination of total carbon in steels and irons Gravimetric method after combustion in a stream of oxygen《黑色金属材料的化学分.pdf

NBN-EN 10045-1-1992 6875 Metallic materials - Charpy impact test - Part 1 Test method《金属材料 摆锤式冲击试验 第1部分：试验方法》.pdf