MNOSZ 2647-1953 《电缆 6x6－36，中间含麻、软钢镶嵌物》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TCVN 7678-2007 Machine tools Test conditions for wire electrical-discharge machines (wire EDM) Terminology and testing of the accuracy《机床 电火花线切割机的试验条件 术语和精度检验》.pdf

TCVN 7679-2007 Machine tools Test conditions for horizontal spindle turret and single spidle automatic lathes Testing of the accuracy《机床 卧式轴六角自动车床和卧式单轴自动车床的试验条件 精度试验》.pdf

TCVN 7680-2007 Electrical accessories Cord sets and interconnection cord sets《电器附件 电线组件和互连电线组件》.pdf

TCVN 7681-4-2007 Test conditions for numerically controlled turning machine and turning centres Part 4 Accuracy and repeatability of positioning of linear and rotary axes《数字控制旋转机械和.pdf

TCVN 7681-7-2007 Test conditions for numerically controlled turning machine and turning centres Part 7 Evaluation of contouring performance in the coordinate planes《数字控制旋转机械和旋转中心试验.pdf

TCVN 7681-8-2007 Test conditions for numerically controlled turning machine and turning centres Part 8 Evaluation of thermal distortion《数字控制旋转机械和旋转中心试验条件 第8部分 热变形的评价》.pdf

TCVN 7682-2007 Microbiology of food and animal feeding stuffs Polymerase chain reaction (PCR) for the detection of food-borne pathogens Requirements for amplification and detection.pdf

TCVN 7683-1-2007 Test conditions for milling machine with table of variable height Testing of the accuracy Part 1 Machines with horiaontal spindle 《带可变高度工作台的铣床的试验条件 精度检验 第1部分 带水平主轴.pdf

TCVN 7683-2-2007 Test conditions for milling machine with table of variable height Testing of the accuracy Part 2 Machines with verticle spindle 《带可变高度工作台的铣床的试验条件 精度检验 第2部分 带垂直主轴的机.pdf