MNOSZ 3301-1955 《铝制煎蛋器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 24 1309-1989 Three-jaw drill chucks with key《带栓的三爪钻头夹盘》.pdf

CSN 24 1310-1988 Three jaw drill chucks without key《无钥匙三爪钻头夹盘》.pdf

CSN 24 1320-1984 Three-jaw drill chucks with key《带栓的三爪钻头夹盘 标准尺寸》.pdf

CSN 24 1321-1984 Geared operating key for three jaw drill chucks《用于三爪钻夹头的齿轮操作栓》.pdf

CSN 24 1329-1984 Arbors for drilling machine chucks《钻机卡盘用辊轴》.pdf

CSN 24 1332-1977 Quick-acting chuck heads《快速卡盘封头》.pdf

CSN 24 1333-1977 Interchangeable bushings for quick-acting chuck heads《带快速卡盘封头的可互换轴衬》.pdf

CSN 24 1334-1977 Interchangeable free bushings for quick-acting chuck heads《用于快速卡盘封头的可互换自由轴衬》.pdf

CSN 24 1344-1977 Interchangeable fastened bushings with taper for drill chucks《用于钻夹头的带锥可互换固定轴衬》.pdf