MNOSZ 4019-1953 《科耐型钳子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS M ISO 11248-2007 Plastics－Thermosetting moulding materials－Evaluation of shortterm performance at elevated temperatures《塑料 热固模塑材料 高温下短期特性的评定》.pdf

KS M ISO 1133-1-2012 Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method《塑料 热塑塑料熔体质量流速(MFR)和熔体体积流速(MVR)的测.pdf

KS M ISO 11343-2010 Adhesives－Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions－Wedge impact method《粘合剂 冲击条件下高强度胶粘剂耐动态劈裂的测定 楔形.pdf

KS M ISO 11345-2007 Rubber－Assessment of carbon black and carbon black silica dispersion－Rapid comparative methods《橡胶 炭黑和炭黑 硅土分散性的评估 快速比较法》.pdf

KS M ISO 11359-3-2008 Plastics－Thermomechanical analysis(TMA)－Part 3：Determination of penetration temperature《塑料 热力学分析(TMA) 第3部分 渗透温度的测定》.pdf

KS M ISO 11401-2010 Plastics－Phenolic resins－Separation by liquid chromatography《塑料 酚醛树脂 用液相色谱法分离》.pdf

KS M ISO 11402-2006 Phenolic amino and condensation resins－Determination of free－formaldehyde content《酚醛树脂、氨基树脂和缩合树脂 游离甲醛含量的测定》.pdf

KS M ISO 11409-2006 Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry《塑料 酚醛树脂 差示扫描量热法测定反应热及温度》.pdf

KS M ISO 11424-2008 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines－Specification《内燃机的空气的和真空系统用橡胶软管和空气管规范》.pdf