MNOSZ 4289-1951 《手术器具Bruns型尖勺子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

Q GDW 1974-2013 分布式光伏专用低压反孤岛装置技术规范及编制说明.pdf

Q GDW 1978-2013 电力金具电晕试验紫外成像检测方法及编制说明.pdf

Q GDW 11216-2014 1000kV变电站初步设计内容深度规定及编制说明.pdf

Q GDW 11217-2014 1000kV变电站施工图设计内容深度规定及编制说明.pdf

Q GDW 11218-2014 ±1100kV换流变压器交流局部放电现场试验导则及编制说明.pdf

Q GDW 11219-2014 气体绝缘金属封闭开关设备的特快速瞬态过电压测量系统通用技术条件及编制说明.pdf

Q GDW 1311-2014 1000kV交流线路金具电晕及无线电干扰试验方法及编制说明.pdf

Q GDW 1389-2014 架空送电线路扩径导线架线施工工艺导则及编制说明.pdf

Q GDW 1465-2014 输电杆塔高强钢焊接质量检验技术条件及编制说明.pdf