MNOSZ 5841-1952 《燃气内部燃烧马达》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SS-ISO 2561-1987 Plastics - Determination of residual styrene monomer in polystyrene by gas chromatography《塑料 通过气相色谱法对聚苯乙烯中残留苯乙烷的测定》.pdf

SIS SS-ISO 2562-1992 Modul r units for machine tool construc- tion Slide units《组合机床通用部件 滑动部件》.pdf

SIS SS-ISO 2568-1990 Hand- and machine-operated circular screwing dies and hand-operated die stocks《手工和机器操作的圆形螺纹模具和手工操作的板牙扳手》.pdf

SIS SS-ISO 2575-1981 Road vehicles - Symbols for controls indicators and tell-tales《道路车辆 控制器、指示器和信号装置符号》.pdf

SIS SS-ISO 2631 3-1985 Vibration and shock - Part 3 Evaluation of exposure to whole-body z-axis vertical vibration in the frequency range 0 1 to 0 63 Hz《振动与冲击 第3部分：频率范围在0 1至0 63 Hz.pdf

SIS SS-ISO 2631-1982 Vibration and shock - Guide for the evaluation of human exposure to whole-body vibration《振动与冲击 人体全身振动影响评价》.pdf

SIS SS-ISO 2632-1-1989 Roughness comparison specimens Part 1 Turned ground bored milled shaped and planed《粗糙度比较样品 第1部分：转动；研磨；钻孔；铣制；成形并刨光》.pdf

SIS SS-ISO 2632-2-1989 Roughness comparison specimens Part 2 Spark-eroded shot-blasted and grit-blasted and polished《粗糙度比较样品 第2部分：电火花加工；喷丸处理；喷砂处理及抛光》.pdf

SIS SS-ISO 266-1985 Acoustics Preferred frequencies for measurement《声学 测试的优先频率》.pdf