MNOSZ 6439-1953 《大型机械形状产品 柱形槽连接车床主要部分》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 25966-1983 Agricultural pedigree cattle Methods of determination of productivity parameters of horned cattle of milk and combined directions《农牧业良种牲畜 奶用及混合型大角家畜产量效率测量方法》.pdf

GOST 25967-1983 Agricultural pedigree cattle Methods of determination of productivity parameters of horned cattle of meat direction《农牧业良种牲畜 肉用大角家畜产量效率测量方法》.pdf

GOST 25968-1983 Photographic materials on transparent base Method for determination of root-mean-square granularity《透明基照相材料 颗粒均方值测定法》.pdf

GOST 25969-1983 Combined alternative broaches for 6 slitting holes with straightside profile and centring at inside diameter Design and dimensions《内径定心直线键槽侧面六键孔的交替切削复合拉刀 结构及尺寸》.pdf

GOST 25970-1983 Combined alternative double driven broaches for 6 slitting holes with straightside profile and centring at internal diameter Design and dimensions《内径定心直线键槽侧面六键孔的交替切.pdf

GOST 25971-1983 Combined alternative broaches for 8 slitting holes with straightside profile and centring at internal diameter Design and dimensions《内径定心直线键槽侧面八键孔的交替切削复合拉刀 结构及尺寸》.pdf

GOST 25972-1983 Combined alternatives double driven broaches for 8 slitting holes with straightside profile and centring at internal diameter Design and dimensions《内径定心直线键槽侧面八键孔的交替.pdf

GOST 25973-1983 Combined alternatives broaches for 10 slitting holes with straightside profile and centring at internal diameter Design and dimensions《内径定心直线键槽侧面十键孔的交替切削复合拉刀 结构及尺寸》.pdf

GOST 25974-1983 Combined alternatives double driven broaches for 10 slitting holes with straighside profile and centring at internal diameter Design and dimensions《内径定心直线键槽侧面十键孔的交替.pdf