MNOSZ 6643-1952 《实验室钢铁制三角桌》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

UNI 6990-1971 Measuring instruments Setting plugs for go and not go screw calliper gauges for ISO metric threads with nominal diameter above 50 to 100 mm 《测量工具 标称直径超过50-100mm的ISO公制.pdf

UNI 6991-1971 Measuring instruments Go and not go setting plugs for go and not go screw calliper gauges for ISO metric threads with nominal diameter above 18 to 50 mm 《测量工具 标称直径超过1.pdf

UNI 6992-1971 Measuring instruments Go plug gauges for nominal sizes above 1 5 to 50 mm 《直径超过1 5mm至50mm的光滑过端塞规测量工具》.pdf

UNI 6993-1971 Measuring instruments go plug gauges for nominal sizes above 50 to 100 mm 《直径超过50mm至100mm的光滑过端塞规测量工具》.pdf

UNI 6994-1971 Measuring instruments Not go plug gauges for nominal sizes from 1 5 to 50 mm 《测量工具 标称尺寸超过1 5－50mm的光滑不过端塞》.pdf

UNI 6995-1971 Measuring instruments Not go plug gauges for nominal sizes above 50 to 100 mm 《测量工具 标称尺寸超过50－100mm的光滑不过端塞》.pdf

UNI 6996-1971 Measuring instruments Go and not go plug gauges for nominal sizes above 1 5 to 50 mm 《直径超过1 5mm－50mm的光滑极限塞规测量工具》.pdf

UNI 6997-1971 Measuring instruments Screw gauging members with profil with complete flanks and taper shaft for ISO metric threads with nominal diameter above 1 5 to 50 mm 《测量工具 直径超.pdf

UNI 6998-1971 Measuring instruments Not go screw gauging members with profile with truncated flanks and taper shaft for ISO metric threads with nominal diameter above 1 5 to 50 mm .pdf