MNOSZ 6763-1954 《马郁兰油》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M33J3-C4-1996 ENAMEL COMPLIANCE VOC THERMOSET TINTED CLEARCOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS WITH ESB-M33J3- A1 ETCH RESISTANT - EXTERIOR TO BE USED WITH FORD WSS.pdf

FORD ESB-M33J3-C5-1996 ENAMEL COMPLIANCE VOC THERMOSET TINTED CLEARCOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS WITH ESB-M33J3- B2 ETCH RESISTANT - EXTERIOR TO BE USED WITH FORD WSS.pdf

FORD ESB-M36J1-A1-1996 ENAMEL THERMOSETTING ACRYLIC BASECOAT HIGH SOLIDS WET ON WET PROCESS EXTERIOR《汽车外部用湿碰湿工艺高含固量、使用丙烯酸系树脂底漆的热固瓷漆》.pdf

FORD ESB-M36J1-A2-1996 ENAMEL THERMOSET 2 COMPONENT URETHANE CLEARCOAT 5 K H N TUKON HIGH SOLIDS WET- ON-WET PROCESS EXTERIOR (Shown on FORD ESB-M36J1-A1)《汽车外部用湿碰湿工艺用高含固量5K H N TUK.pdf

FORD ESB-M36J1-A3-2012 ENAMEL CATALKYZED 2- COMPONENT CLEARCOAT HIGH SOLIDS WET-ON-WET LOW BAKE REPAIR PROCESS - EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M36J1-A4-2012 ENAMEL THERMOSET 2-COMPONENT URETHANE CLEARCOAT 10 K H N TUKON HIGH SOLIDS WET-ON-WET PROCESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD E.pdf

FORD ESB-M36J3-A-2012 ENAMEL THERMOSET TWO- COMPONENT COLOR COAT EXTERIOR LOW GLOSS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M3D101-A-2004 POLYESTER RESIN FIBERGLASS REINFORCED BULK MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《玻璃丝增强的聚酯树脂预制整体成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M3D105-B-2004 POLYESTER RESIN GLASS FIBER REINFORCED MATCHED METAL DIE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《玻璃纤维增强的聚酯树脂配对金属模压成型料 与标准FORD WSS-M99P1111-A.pdf