MNOSZ 9481-1951 《皮原料样品采集》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 23185-2009 Assessment and benchmarking of terminological resources - General concepts principles and requirements《术语资源的评估和标记 一般概念 原理和要求》.pdf

ISO 23202-2006 Aluminium oxide used for the production of aluminium - Determination of particles passing a 20 micrometre aperture sieve《铝制产品用氧化铝 经过一个20微米孔隙筛的粒子的.pdf

ISO 23206 CORR 1-2007 Agricultural wheeled tractors and attachments - Front loaders - Carriages for attachments Technical Corrigendum 1《农用轮式拖拉机及附件 前端式装载机 附件用支架 .pdf

ISO 23206-2005 Agricultural wheeled tractors and attachments - Front loaders - Carriages for attachments《农用轮式拖拉机及附件 前端式装载机 附件用拖板》.pdf

ISO 23231-2008 Textiles - Determination of dimensional change of fabrics - Accelerated machine method《纺织物 织物尺寸变化的测定 加速机械法》.pdf

ISO 23233 AMD 1-2017 Rubber vulcanized or thermoplastic - Determination of resistance to abrasion using a driven vertical abrasive disc Amendment 1《硫化或热塑性橡胶 垂直磨.pdf

ISO 23233-2016 Rubber vulcanized or thermoplastic - Determination of resistance to abrasion using a driven vertical abrasive disc《硫化或热塑性橡胶 垂直磨盘驱动用抗磨损的测定》.pdf

ISO 2325-1986 Coke Size analysis (Nominal top size 20 mm or less)《焦炭 粒度分析(标称最大粒度小于或等于20mm)》.pdf

ISO 2326-1972 Continuous mechanical handling equipment for loose bulk materials Aeroslides《松散物料连续搬运设备 空气滑槽》.pdf