MNOSZ 9645-1952 《油料和颜料粘度（判断）检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF L22-439-2000 Aircraft bolts and nuts - Nuts hexagonal plain reduced height normal across flats with locking holes ISO M or ISO MJ threads 4H tolerance class 《飞机用螺栓和螺母 ISO M或ISO .pdf

NF L22-440-2000 Aircraft bolts and nuts - Nuts hexagonal plain reduced height normal across flats with locking holes left-hand ISO M or ISO MJ threads 4H tolerance class 《飞机用螺栓和螺母 .pdf

NF L22-441-2000 Aircraft bolts and nuts - Nuts hexagonal plain reduced height reduced across flats ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter 《飞机用螺栓和螺.pdf

NF L22-442-2000 Aircraft bolts and nuts - Nuts hexagonal plain reduced height reduced across flats left-hand ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diamete.pdf

NF L22-443-2000 Aircraft bolts and nuts - Nuts hexagonal plain reduced height reduced across flats with locking holes ISO M or ISO MJ threads 4H5H or 5H tolerance class according t.pdf

NF L22-444-2000 Aircraft bolts and nuts - Nuts hexagonal plain reduced height reduced across flats with locking holes left-hand ISO M or ISO MJ threads 4H5H or 5H tolerance class a.pdf

NF L22-451-2000 Aircraft bolts and nuts - Nuts hexagonal slotted castellated normal height ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter 《飞机用螺栓和螺母 ISO M或.pdf

NF L22-453-2000 fr 6373 Aircraft bolts and nuts - Nuts hexagonal slotted castellated reduced height ISO M or ISO MJ threads 4H5H or 5H tolerance class according to diameter 《飞机用螺栓和.pdf

NF L22-455-2000 Aircraft bolts and nuts - Nuts hexagonal slotted castellated reduced height ISO M or ISO MJ threads 4H tolerance class 《飞机用螺栓和螺母 ISO M或ISO MJ螺纹 公差等级4H 带槽／带缺口 减少高度六角.pdf