HB 7028.24-1994 《夹具通用元件压紧件 锥面压块》.pdf

相关资源

HB 7028.23-1994 《夹具通用元件压紧件 直角压块》.pdf

HB 7028.23-1994 夹具通用元件压紧件直角压块.pdf

HB 7028.23-1994 夹具通用元件压紧件.直角压块.pdf

HB 7028.24-1994 夹具通用元件压紧件.锥面压块.pdf

HB 7028.24-1994 夹具通用元件压紧件锥面压块.pdf

HB 7028.21-1994 《夹具通用元件压紧件 圆头压块》.pdf

HB 7028.21-1994 夹具通用元件压紧件.圆头压块.pdf

HB 7028.22-1994 《夹具通用元件压紧件 圆头齿面压块》.pdf

HB 7028.22-1994 夹具通用元件压紧件.圆头齿面压块.pdf

猜你喜欢

SANS 2859-10-2008 Sampling procedures for inspection by attributes Part 10 Introduction to the ISO 2859 series of standards for sampling for inspection by attributes《按属性检查抽样程序 第10部.pdf

SANS 2859-3-2008 Sampling procedures for inspection by attributes Part 3 Skip-lot sampling procedures《属性检验用抽样程序 第3部分 箕斗式取样程序》.pdf

SANS 2859-4-2008 Sampling procedures for inspection by attributes Part 4 Procedures for assessment of declared quality levels《按属性检查抽样程序 第4部分 检查程序 宣称质量水平评价程序》.pdf

SANS 2859-5-2008 Sampling procedures for inspection by attributes Part 5 System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection《按属性.pdf

SANS 286-1-1988 ISO system of limits and fits Part 1 Bases of tolerances deviations and fits《ISO极限和配合制度 第1部分：容差、偏差以及配合的基点》.pdf

SANS 286-2-1988 ISO system of limits and fits Part 2 Tables of standard tolerance grades and limit deviations for holes and shafts《ISO极限和配合制度 第2部分：孔和轴的标准容差等级和极限偏差表》.pdf

SANS 2860-2003 Earth-moving machinery - Minimum access dimensions《土方机械 最小通道尺寸》.pdf

SANS 2931-1983 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance《铝及铝合金阳极氧化 用导纳或阻抗测量法评定阳极氧化膜的卦孔.pdf

SANS 295-2007 Calcium hypochlorite《次氯酸钙》.pdf