HD 372 S1-1988 Safety of Electrically Energized Office Machines《电动办公机器的安全》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE MA 3369-1987 Bolt Machine-Hex Head Drilled PD Shank Long Thread AMS 5662 Metric《AMS 5662的六角头钻孔、PD柄长螺纹机器螺栓（米制）》.pdf

SAE MA 3371-1991 Bolt Spline Drive Extended Washer Head Drilled PD Shank Long Thread AMS 5708 Metric《公制FSC 5306 AMS 5708长螺纹PD杆钻孔花键传动扩展垫圈头螺栓》.pdf

SAE MA 3374C-2012 Bolts and Screws UNS S66286 Corrosion and Heat Resistant Steel Procurement Specification Metric《公制耐腐蚀和耐热钢制UNS S66286螺栓和螺丝采购规范》.pdf

SAE MA 3375C-2011 Studs Corrosion and Heat Resistant Steel UNS S66286 Tensile Strength 900 MPa Procurement Specification Metric《符合UNS S66286 900 MPa抗拉强度公制采购规范的耐腐蚀和耐热钢螺栓》.pdf

SAE MA 3376B-1997 Bolts & Screws UNS G87400 Tensile Strength 860 MPa & 1000 MPa Procurement Specification Metric《米制、拉伸强度860 MPa和1000 MPa UNS G87400螺栓和螺钉的采购规范》.pdf

SAE MA 3377B-2008 Bolts and Screws Nickel Alloy UNS N07718 Tensile Strength 1275 MPa Procurement Specification Metric《拉伸强度为1275MPa的米制UNS NO7718镍合金螺栓和螺钉的采购规范》.pdf

SAE MA 3378C-1997 Bolts and Screws UNS N07001 Tensile Strength 1210 MPa Thread and Fillet Radius Rolled Before Aging Procurement Specification Metric《公制UNS N07001老化前滚制螺纹和圆角半径的抗张强度为.pdf

SAE MA 3379-1988 STUD STRAIGHT - 2 5 DIA ENGAGEMENT A286 MJ METRIC 6 X 1 - 6 X 1《MJ 公制6 X 1 - 6 X 1 FSC 5307的A286 2 5直径啮合直型螺柱》.pdf

SAE MA 3380-1988 STUD STRAIGHT - 2 5 DIA ENGAGEMENT A286 MJ METRIC 7 X 1 - 7 X 1《MJ公制7 X 1-7 X 1 FSC 5307 A286 2 5直径啮合式直型螺柱》.pdf