I-1622-1981 《预包装产品 流质食物，定义，接收标准，容积数据审核》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SN ISO 2558-1979 Mats de verre textile fils coupes pour renforcement des ma-tteres plastiquesDetermination du temps de dissolution du liant dans le styrene《管道 浇.pdf

SN ISO 2577-1987 PlasticsDetermination of temperature of evolution of flammable gases (decomposition temperature)from a small sample of pulverized material《1o紧固.pdf

SN ISO 2578-1978 PlasticsDetermination of time-temperature limits after exposure to pro-longed action of heat《管道 带有弹簧和凹槽的法兰 环形橡胶密封件的车削环形槽1）ND 40至160，NW100至550》.pdf

SN ISO 2797-1982 Textile glassRovingsBasis for specification《带有适用圆柱形轴端（便于伸缩） -）短轮毂的P型固定联轴器（配合螺栓），螺栓圆周直径主要尺寸 k = 48 370 mm》.pdf

SN ISO 291-1985 TextilesTests for colour fastnessSection X09 Colour fastness to formaldehyde《碎片和碎石大小 质量规定》.pdf

SN ISO 2931-1986 Anodizing of aluminium and its alloysAssessment of quality of sealed anodicoxide coatings by measurement of admittance or impedance《铝线和汇流排规则》.pdf

SN ISO 306-1984 PlasticsDetermination of the Vicat softening temperature of thermoplastics《纺织产品 质量规定和命名规定》.pdf

SN ISO 31 0-1985 Hexagon nuts style 1Product grades A and B《固定联轴器 型号 R（摩擦阻力）带有套筒，适用于圆锥形轴端 1）螺栓圆周直径的主要尺寸 k = 215 850 mm》.pdf

SN ISO 3210-1986 Anodizing of aluminium and its alloysAssessment of quality of sealed anodic oxide coatingsby measurement of the loss of mass after immersion in.pdf