QC T 1092-2018 《商用车15深槽钢制车轮静态刚度试验方法》.pdf

相关资源

QC T 457-2023 救护车.pdf

QC T 1197-2023 汽车气压制动系统用冷凝器性能要求及台架试验方法.pdf

QC T 820-2023 汽车、摩托车仪表用步进电机.pdf

QC T 911-2023 电源车.pdf

QC T 54-2023 洒水车.pdf

QC T 625-2024 汽车用涂镀层和化学处理层.pdf

QC T 1204.5-2024 纯电动乘用车车载换电系统互换性 第5部分：车辆与电池包的通信.pdf

QC T 656-2023 汽车空调用空气调节装置总成.pdf

QC T 946-2024 汽车安全带织带.pdf

QC T 957-2023 洗扫车.pdf

猜你喜欢

GOST IEC 61107-2011 Data exchange for meter reading tariff and load control Direct local data exchange《仪表读数、收费和负载控制用数据交换 直接本地数据交换》.pdf

GOST IEC 61131-2-2012 Programmable controllers Part 2 Equipment requirements and tests《可编程控制器 第2部分 设备要求和试验》.pdf

GOST IEC 61142-2011 Data exchange for meter reading tariff and load control Local bus data exchange《仪表读数、价格和载荷控制用数据交换 本地总线数据交换》.pdf

GOST IEC 61157-2013 Medical electrical equipment Devices for ultrasonic diagnostics Requirements for the declaration of acoustic output parameters in technical documents《医疗电气设备 超声诊.pdf

GOST IEC 61161-2014 State system for ensuring the traceability of measurements Ultrasonic power in liquids General requirements to measuring methods in the frequency range 0 5 to 2.pdf

GOST IEC 61168-2011 Radiotherapy simulators Functional performance characteristics《放射治疗模拟器 功能性能特征》.pdf

GOST IEC 61184-2011 Bayonet lampholders《卡口灯座》.pdf

GOST IEC 61188-1-1-2013 Printed boards and printed board assemblies Design and use Part 1-1 Generic requirements Flatness considerations for electronic assemblies《印制板和印制板组件 设计和使用 第.pdf

GOST IEC 61188-1-2-2013 Printed boards and printed board assemblies Design and use Part 1-2 Generic requirements Controlled impedance《印制板和印制板组件 设计和使用 第1-2部分 通用要求 控制阻抗》.pdf