1、 IEC 60512-9-1 Edition 1.0 2010-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment Tests and measurements Part 9-1: Endurance tests Test 9a: Mechanical operation Connecteurs pour quipements lectroniques Essais et mesures Partie 9-1: Essais dendurance Essai 9a: Fonctio
2、nnement mcanique IEC 60512-9-1:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
3、 and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC
4、member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, san
5、s laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsi
6、dence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and rel
7、ated technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line
8、 Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details
9、 twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional l
10、anguages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.:
11、+41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publicatio
12、ns CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous p
13、ermet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI
14、. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en f
15、ranais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des quest
16、ions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60512-9-1 Edition 1.0 2010-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment Tests and measurements Part 9-1: Endurance tests Test 9a: Mechanic
17、al operation Connecteurs pour quipements lectroniques Essais et mesures Partie 9-1: Essais dendurance Essai 9a: Fonctionnement mcanique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE E ICS 31.220.01 PRICE CODE CODE PRIX ISBN 2-8318-1085-4 Registered trademark of
18、 the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60512-9-1 IEC:2010 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 9-1: Endurance tests Test 9a: Mechanical operation FOREWORD 1)
19、 The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical
20、 and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical
21、 committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organizat
22、ion for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical com
23、mittee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications
24、is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and
25、 regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services an
26、d, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or
27、 agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use
28、 of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that s
29、ome of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60512-9-1 has been prepared by subcommittee 48B: Connectors, of IEC technical committee 48: Electromechanical c
30、omponents and mechanical structures for electronic equipment. This standard cancels and replaces Test 9a of IEC 60512-5, issued in 1992. The structure of IEC 60512 series is explained in IEC 60512-1-100. 60512-9-1 IEC:2010 3 The text of this standard is based on the following documents: CDV Report o
31、n voting 48B/2018/CDV 48B/2118/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 3. A list of all parts of IEC 60512 series, under t
32、he general title Connectors for electronic equipment Tests and measurements, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related
33、 to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 60512-9-1 IEC:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 9-1: Endurance tests Test 9a: Mechanical operation 1 Scope and object This part
34、of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to assess the mechanic
35、al operational endurance of connectors in the normal operating mode, without electrical load. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edi
36、tion of the referenced document (including any amendments) applies. IEC 60512-1-1: Connectors for electronic equipment Tests and measurements Part 1-1: General examination, Test 1a: Visual examination IEC 60512-2-1: Connectors for electronic equipment Tests and measurements Part 2-1: Electrical cont
37、inuity and contact resistance tests Test 2a: Contact resistance Millivolt level method IEC 60512-2-6: Connectors for electronic equipment Tests and measurements Part 2-6: Electrical continuity and contact resistance tests Test 2f: Housing (shell) electrical continuity IEC 60512-3-1: Connectors for e
38、lectronic equipment Tests and measurements Part 3-1: Insulation tests Test 3a: Insulation resistance IEC 60512-4-1: Connectors for electronic equipment Tests and measurements Part 4-1: Voltage stress tests Test 4a: Voltage proof IEC 60512-13-5: Connectors for electronic equipment Tests and measureme
39、nts Part 13-5: Mechanical operation tests Test 13e: Polarizing and keying method 3 Preparation of the specimen The specimen shall be prepared and mounted according to the detail specification. 4 Test method The specimen shall be subjected to a mechanical operational endurance test in accordance with
40、 the requirements of the detail specification (without electrical load). The specimen shall be operated in the normal manner. 60512-9-1 IEC:2010 5 Frequency, number and speed of the operations shall be as stated in the detail specification. Unless prohibited by the detail specification, mechanical a
41、ids which simulate normal operation may be used provided that they do not introduce abnormal stresses. 5 Final measurements a) Visual examination (IEC 60512-1-1, test 1a). b) Contact resistance (IEC 60512-2-1, test 2a, as appropriate). c) Housing (shell) electrical continuity IEC 60512-2-6, (test 2f
42、). d) Insulation resistance (IEC 60512-3-1, test 3a). e) Voltage proof (IEC 60512-4-1, test 4a). f) Mechanical operational characteristics, including effectiveness of keys and polarizing method (IEC 60512-13-5, test 13e). NOTE If applicable, the detail specification may require a sealing test from t
43、he IEC 60512-14 series or an ingress protection test according IEC 60529. 6 Details to be specified When this test is required by the detail specification, the following details shall be specified: a) preparation of the specimen, including type of cable/wire bundle to be used; b) mounting of the spe
44、cimen; c) number, frequency and speed of operations; d) requirements for final measurements; e) any deviation from the standard test method. _ 6 60512-9-1 CEI:2010 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ CONNECTEURS POUR QUIPEMENTS LECTRONIQUES ESSAIS ET MESURES Partie 9-1: Essais dendurance Ess
45、ai 9a: Fonctionnement mcanique AVANT-PROPOS 1) La Commission Electrotechnique Internationale (CEI) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale pou
46、r toutes les questions de normalisation dans les domaines de llectricit et de llectronique. A cet effet, la CEI entre autres activits publie des Normes internationales, des Spcifications techniques, des Rapports techniques, des Spcifications accessibles au public (PAS) et des Guides (ci-aprs dnomms
47、“Publication(s) de la CEI“). Leur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent galement aux travaux. La CE
48、I collabore troitement avec lOrganisation Internationale de Normalisation (ISO), selon des conditions fixes par accord entre les deux organisations. 2) Les dcisions ou accords officiels de la CEI concernant les questions techniques reprsentent, dans la mesure du possible, un accord international sur les sujets tudis, tant donn que les Comits nationaux de la CEI intresss sont reprsents dans chaque comit dtudes. 3) Les Publications de la CEI se prsentent sous la forme de recommandations internationales et sont agres comme telles par les Comits nationaux de la CEI. Tous les effort
