1、 IEC 62149-5 Edition 2.0 2009-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Performance standards Part 5: ATM-PON transceivers with LD driver and CDR ICs Composants et dispositifs actifs fibres optiques Normes de fonctionnement Partie 5: Emetteurs-rcepteurs
2、 ATM-PON avec programme de gestion LD et ICs CDR IEC 62149-5:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mech
3、anical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the ad
4、dress below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la pho
5、tocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national
6、de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all
7、electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.ie
8、c.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC public
9、ations. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with eq
10、uivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or conta
11、ct us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies appar
12、entes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catal
13、ogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les no
14、uvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et
15、 dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publica
16、tion ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62149-5 Edition 2.0 2009-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Performance standards Part 5: AT
17、M-PON transceivers with LD driver and CDR ICs Composants et dispositifs actifs fibres optiques Normes de fonctionnement Partie 5: Emetteurs-rcepteurs ATM-PON avec programme de gestion LD et ICs CDR INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 33.180.20 P
18、RICE CODE CODE PRIX ISBN 2-8318-1056-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62149-5 IEC:2009 CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Term, definitions and abbreviations 8
19、 3.1 Terms and definitions 8 3.2 Abbreviations 9 4 Classification9 5 Product definition .9 5.1 Description of transceiver module9 5.2 Description of applied form10 5.3 Block diagram .10 5.4 Absolute limiting rating 10 5.5 Functional specification.11 6 Testing .20 6.1 Characterization testing.20 6.1.
20、1 Characterization: transmitter section .21 6.1.2 Characterization: receiver section22 6.2 Performance testing 22 7 Environmental specifications 23 7.1 General safety.23 7.2 Laser safety 23 7.3 Electromagnetic emission23 Annex A (informative) Measurement on tolerance to the reflected optical power (
21、Table 3, Item 13) .24 Annex B (informative) Logic level of alarm and shutdown signal 26 Bibliography27 Figure 1 Functional block diagram (example).10 Figure 2 Relationship of phase between clock and data signals .18 Figure 3 Recommended electrical circuit diagram for LVTTL-type interface (example) .
22、19 Figure 4 Schematic drawing for defining launched optical power without input to transmitter 19 Figure 5 Schematic drawing for defining launched optical power without input to transmitter 20 Figure A.1 Model for incidence into ONU receiver24 Figure A.2 An example system to measure tolerance to the
23、 reflected optical power .24 Figure A.3 A recommended system to measure tolerance to the reflected optical power .25 Table 1 Absolute maximum ratings 11 Table 2 Operating environment12 Table 3 Electrical and optical characteristics13 Table 4 Electrical interface characteristics (PECL type) .16 62149
24、-5 IEC:2009 3 Table 5 Electrical interface characteristics (LVTTL type)17 Table 6 Electrical interface characteristics of alarm output voltage (PECL type).17 Table 7 Electrical interface characteristics of alarm output voltage (LVTTL type) .17 Table 8 Electrical interface characteristics of shutdown
25、 input voltage (both PECL and LVTTL types) .18 Table 9 Transmitter section characterization tests .21 Table 10 Receiver section characterization tests .22 Table 11 Performance testing plan.23 4 62149-5 IEC:2009 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PER
26、FORMANCE STANDARDS Part 5: ATM-PON transceivers with LD driver and CDR ICs FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote in
27、ternational co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (herea
28、fter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also part
29、icipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, a
30、n international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all
31、 reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to app
32、ly IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate i
33、ts approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including indiv
34、idual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon,
35、this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of
36、this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62149-5 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. Th
37、is second edition cancels and replaces the first edition published in 2003, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: Normative references have been updated Incorrect “Letter symbols” have been corrected Some “Notes” in tables have
38、been revised in order to harmonize with IEC 62150-2 (2004). 62149-5 IEC:2009 5 The text of this standard is based on the following documents: FDIS Report on voting 86C/891/FDIS 86C/916/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated
39、 in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC 62149 series, published under the general title Fibre optic active components and devices Performance standards, can be found on the IEC website. The committee has dec
40、ided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition,
41、 or amended. 6 62149-5 IEC:2009 INTRODUCTION Fibre optic transceivers are used to convert electrical signals into optical signals and vice versa. The optical performance criteria are generally well specified for a number of internationally agreed applications areas such as ITU-T Recommendation G.983
42、.1 and IEEE 802.3. This standard aims to assure inter-changeability in performance between fibre optic transceivers for ATM-PON systems supplied by different manufacturers, but does not guarantee operation between fibre optic transceivers. Manufacturers using the standards are responsible for meetin
43、g the required performance and/or reliability and quality assurance under a recognized scheme. 62149-5 IEC:2009 7 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 5: ATM-PON transceivers with LD driver and CDR ICs 1 Scope This part of IEC 62149 specifies performance on the transc
44、eiver modules for asynchronous- transfer-mode passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU) in ITU-T Recommendation G.983.1. 2 Normative references The following referenced documents are indispensable for the application of this document. Fo
45、r dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-6:2007, Environmental testing Part 2-6: Tests Test Fc: Vibration (sinusoidal) IEC 60068-2-27:2008, Environmental testing Part 2-27
46、: Tests Test Ea and guidance: Shock IEC 60825-1:2007, Safety of laser products Part 1: Equipment classification and requirements IEC 60950-1:2005, Information technology equipment Safety Part 1: General requirements IEC 61000-6-3, Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emiss
47、ion standard for residential, commercial and light-industrial environments IEC 61280-1-1:1998, Fibre optic communication subsystem basic test procedures Part 1-1: Test procedures for general communication subsystems Transmitter output optical power measurement for single-mode optical fibre cable IEC
48、 61280-1-3:1998, Fibre optic communication subsystem basic test procedures Part 1-3: Test procedures for general communication subsystems Central wavelength and spectral width measurement IEC 61280-2-2:2008, Fibre optic communication subsystem test procedures Part 2-2: Digital systems Optical eye pa
49、ttern, waveform and extinction ratio measurement IEC 61300-2-4:1995, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-17:2003, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1
