1、 IEC 62386-208 Edition 1.0 2009-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Digital addressable lighting interface Part 208: Particular requirements for control gear Switching function (device type 7) Interface dclairage adressable numrique Partie 208: Exigences particulires les pour appareillage
2、s de commande Fonction de commutation (dispositif de type 7) IEC 62386-208:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec
3、tronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please
4、contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y
5、compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le C
6、omit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Stan
7、dards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC public
8、ations: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all
9、new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and F
10、rench, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centr
11、e FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux tech
12、nologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-
13、f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inf
14、orm sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20
15、 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur
16、 cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62386-208 Edition 1.0 2009-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Digital addressable lighting interface Part 208: Particula
17、r requirements for control gear Switching function (device type 7) Interface dclairage adressable numrique Partie 208: Exigences particulires pour les appareillages de commande Fonction de commutation (dispositif de type 7) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERN
18、ATIONALE XB ICS 29.140.50; 29.140.99 PRICE CODE CODE PRIX ISBN 2-8318-1013-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62386-208 IEC:2009 CONTENTS FOREWORD.5 INTRODUCTION.7 1 Scope.8 2 Normative references .8
19、 3 Terms and definitions .8 4 General description 8 5 Electrical specification9 6 Interface power supply .9 7 Transmission protocol structure9 8 Timing 9 9 Method of operation .9 10 Declaration of variables11 11 Definition of commands 12 12 Test procedures .18 Annex A (informative) Examples of algor
20、ithms .70 Bibliography71 Figure 1 Example of a possible configuration.11 Figure 2 Application extended configuration command sequence example.13 Figure 3 Test sequence QUERY FEATURES .19 Figure 4 Test sequence Reset State / Persistent Memory 20 Figure 5 Test sequence QUERY LOAD ERROR.22 Figure 6 Tes
21、t sequence QUERY LOAD ERROR with HOLD-OFF TIME23 Figure 7 Test sequence QUERY LOAD ERROR with indefinitely HOLD-OFF TIME 24 Figure 8 Test sequence QUERY Control Gear Information.25 Figure 9 Test sequence REFERENCE SYSTEM POWER.26 Figure 10 Test sequence REFERENCE SYSTEM POWER: 100 ms-timeout.27 Figu
22、re 11 Test sequence REFERENCE SYSTEM POWER: Command in-between .28 Figure 12 Test sequence REFERENCE SYSTEM POWER: 15 min timer29 Figure 13 Test sequence REFERENCE SYSTEM POWER: failed 30 Figure 14 Test sequence THRESHOLDS: Configuration Sequence 31 Figure 15 Test sequence ERROR HOLD-OFF TIME: Confi
23、guration Sequence .33 Figure 16 Test sequence STORE DTR AS THRESHOLD X 34 Figure 17 Test sequence STORE DTR AS MIN / MAX LEVEL35 Figure 18 Test sequence STORE DTR AS ERROR HOLD-OFF TIME 36 Figure 19 Test sequence ENABLE DEVICE TYPE: Appl. extended query commands.37 Figure 20 Test sequence ENABLE DEV
24、ICE TYPE: Reference System Power 38 Figure 21 Test sequence ENABLE DEVICE TYPE: Other Application Extended Configuration Commands39 Figure 22 Test sequence ENABLE DEVICE TYPE: Error Hold-Off Time.41 Figure 23 Test sequence ENABLE DEVICE TYPE: Application Extended Configuration Commands 2.42 62386-20
25、8 IEC:2009 3 Figure 24 Test sequence DEFAULT ON AND OFF.44 Figure 25 Test sequence DEFAULT OFF WITH FADING .45 Figure 26 Test sequence SWITCHING ON AND OFF FULL RANGE47 Figure 27 Test sequence SWITCHING ON AND OFF LIMITED RANGE 51 Figure 28 Test sequence VIRTUAL DIMMING FADE TIME54 Figure 29 Test se
26、quence VIRTUAL DIMMING FADE RATE.56 Figure 30 Test sequence SWITCHING ON AND OFF IAPC.57 Figure 31 Test sequence SWITCHING ON AND OFF ADJUSTING THRESHOLDS .58 Figure 32 Test sequence SWITCHING ON AND OFF ADJUSTING MIN/MAX 60 Figure 33 Test sequence SWITCHING ON AND OFF DEFAULT POL/SYS62 Figure 34 Te
27、st sequence SWITCHING ON AND OFF POWER ON 64 Figure 35 Test sequence SWITCHING ON AND OFF SYSTEM FAILURE66 Figure 36 Test sequence QUERY EXTENDED VERSION NUMBER.68 Figure 37 Test sequence RESERVED APPLICATION EXTENDED COMMANDS69 Figure A.1 Examples of switching characteristics.70 Table 1 virtual arc
28、 power level (VAPL) .11 Table 2 Declaration of variables.12 Table 3 Summary of the application extended command set 18 Table 4 Parameters for the test sequence State / Persistent Memory.21 Table 5 Test step QUERY LOAD ERROR with HOLD-OFF TIME23 Table 6 Test steps REFERENCE SYSTEM POWER: Command in-b
29、etween.28 Table 7 Test parameter and test steps 1 THRESHOLDS: Configuration Sequence.31 Table 8 Test parameter and test steps 2 THRESHOLDS: Configuration Sequence.32 Table 9 Test parameter and test steps 3 THRESHOLDS: Configuration Sequence.32 Table 10 Test steps ERROR HOLD-OFF TIME: Configuration S
30、equence .33 Table 11 Test steps STORE DTR AS THRESHOLD X34 Table 12 Test steps STORE DTR AS MIN / MAX LEVEL35 Table 13 Test steps STORE DTR AS ERROR HOLD-OFF TIME 36 Table 14 Test steps ENABLE DEVICE TYPE: Appl. extended query commands.37 Table 15 Test steps ENABLE DEVICE TYPE: Reference System Powe
31、r 38 Table 16 Test steps 1 ENABLE DEVICE TYPE: Other Application Extended Configuration Commands40 Table 17 Test steps 2 ENABLE DEVICE TYPE: Other Application Extended Configuration Commands40 Table 18 Test steps 3 ENABLE DEVICE TYPE: Other Application Extended Configuration Commands40 Table 19 Test
32、 steps ENABLE DEVICE TYPE: Error Hold-Off Time.41 Table 20 Test steps 1 ENABLE DEVICE TYPE: Application Extended Configuration Commands 2 43 Table 21 Test steps 2 ENABLE DEVICE TYPE: Application Extended Configuration Commands 2 43 Table 22 Test steps DEFAULT ON AND OFF.44 Table 23 Test steps 1 DEFA
33、ULT OFF WITH FADING 45 4 62386-208 IEC:2009 Table 24 Test steps 2 DEFAULT OFF WITH FADING 46 Table 25 Test steps and parameter 1 SWITCHING ON AND OFF FULL RANGE.48 Table 26 Test steps and parameter 2 SWITCHING ON AND OFF FULL RANGE.48 Table 27 Test steps and parameter 3 SWITCHING ON AND OFF FULL RAN
34、GE.48 Table 28 Test steps and parameter 4 SWITCHING ON AND OFF FULL RANGE.49 Table 29 Test steps and parameter 5 SWITCHING ON AND OFF FULL RANGE.50 Table 30 Test steps and parameter 1 SWITCHING ON AND OFF LIMITED RANGE52 Table 31 Test steps and parameter 2 SWITCHING ON AND OFF LIMITED RANGE52 Table
35、32 Test steps and parameter 3 SWITCHING ON AND OFF LIMITED RANGE52 Table 33 Test steps and parameter 4 SWITCHING ON AND OFF LIMITED RANGE53 Table 34 Test steps and parameter 5 SWITCHING ON AND OFF LIMITED RANGE53 Table 35 Test steps and parameter 1 VIRTUAL DIMMING FADE TIME .54 Table 36 Test steps a
36、nd parameter 2 VIRTUAL DIMMING FADE TIME .55 Table 37 Test steps and parameter 3 VIRTUAL DIMMING FADE TIME .55 Table 38 Test steps VIRTUAL DIMMING FADE RATE.56 Table 39 Test steps SWITCHING ON AND OFF IAPC.57 Table 40 Test steps and parameter 1 SWITCHING ON AND OFF ADJUSTING THRESHOLDS59 Table 41 Te
37、st steps and parameter 2 SWITCHING ON AND OFF ADJUSTING THRESHOLDS59 Table 42 Test steps and parameter 3 SWITCHING ON AND OFF ADJUSTING THRESHOLDS59 Table 43 Test steps and parameter 1 SWITCHING ON AND OFF ADJUSTING MIN/MAX 60 Table 44 Test steps and parameter 2 SWITCHING ON AND OFF ADJUSTING MIN/MA
38、X 61 Table 45 Test steps and parameter 3 SWITCHING ON AND OFF ADJUSTING MIN/MAX 61 Table 46 Test steps and parameter 1 SWITCHING ON AND OFF DEFAULT POL/SYS 62 Table 47 Test steps and parameter 2 SWITCHING ON AND OFF DEFAULT POL/SYS 63 Table 48 Test steps and parameter 1 SWITCHING ON AND OFF POWER ON
39、 .64 Table 49 Test steps and parameter 2 SWITCHING ON AND OFF POWER ON .65 Table 50 Test steps and parameter 1 SWITCHING ON AND OFF SYSTEM FAILURE 66 Table 51 Test steps and parameter 2 SWITCHING ON AND OFF SYSTEM FAILURE 67 Table 52 Test steps RESERVED APPLICATION EXTENDED COMMANDS .69 62386-208 IE
40、C:2009 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 208: Particular requirements for control gear Switching function (device type 7) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
41、 all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standa
42、rds, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prepar
43、atory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organiz
44、ations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of
45、 recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation
46、 by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or region
47、al publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publi
48、cation. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to t
