MT T 636-1996 《矿井主要通风机优选程序编制 通用规则》.pdf

相关资源

MR T 0001-2025 自然人网店管理规范.pdf

MT T 1201.2-2023 煤矿感知数据联网接入规范 第2部分：重要设备.pdf

MT T 1199-2023 煤矿用防爆柴油机无轨胶轮运输车辆通用安全技术条件.pdf

MT T 1208-2023 煤矿在用产品安全检测检验规范 摩擦式提升机系统.pdf

MT T 1207-2023 煤矿在用产品安全检测检验规范 缠绕式提升机系统.pdf

MT T 1198-2023 煤矿井下人员位置监测系统使用与管理规范.pdf

MT T 1206-2023 煤矿在用产品安全检测检验规范 提升绞车系统.pdf

MT T 1201.4-2023 煤矿感知数据联网接入规范 第4部分：水害防治.pdf

MT T 1202.1-2023 煤矿数据采集与传输技术要求 第1部分：总体要求.pdf

MT T 1205-2023 煤矿在用产品安全检测检验规范 主要通风机系统.pdf

猜你喜欢

GOST 24814-1981 Radial roof ventilators General specifications《径向屋顶排风机 一般技术条件》.pdf

GOST 24816-2014 Building materials Method of equilibrium hygroscopic moisture determination《建筑材料 平衡吸附水分的测定方法》.pdf

GOST 24818-1981 Broaches combined for b-slitting holes with straightside profile and centring at outside deameter alternatives Design and dimensions《变切削量外直径定心的直齿六花键复合拉刀 双次 结构及尺寸》.pdf

GOST 24819-1981 Broaches combined for 6-slitting holes with straightside profile and centring at outside diameter alternatives Double driven Design and dimensions《外径定心直齿六花键孔用变切削量组合.pdf

GOST 24820-1981 Broaches combined for 8-slitting holes with straight tside proile and centring at outside diameter alternatives Design and dimensions《变切削量外径定心的直齿六花键孔复合拉刀 双次 结构及尺寸》.pdf

GOST 24821-1981 Broaches combined for 8-slitting holes with straightside profile and centring at outside diameter alternatives Double driven Design and dimensions《变切削量的外径定心直齿花键孔复合拉.pdf

GOST 24822-1981 Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter alternatives Design and dimension《变切削量外径定心的直齿十花键孔复合拉刀 结构及尺寸》.pdf

GOST 24823-1981 Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter alternatives Donble driven Design and dimensions《变切削量外径定心的直齿十花键孔复.pdf

GOST 24824-1988 Ironing presses Main dimensions technical requirements and test methods《熨平压机 基本尺寸，技术要求和试验方法》.pdf