YB T 4669-2018 34－二甲酚.pdf

相关资源

YB T 4670-2018 35－二甲酚.pdf

GB T 2600-1997 工业二甲酚.pdf

GB T 2600-2009 焦化二甲酚.pdf

CNS 14921-2005 Xylenol orange《二甲酚橙（试药）》.pdf

JIS K 2437-2008 6875 Phenols (phenol o-cresol cresols and xylenols)《酚(苯酚、邻甲酚、甲酚和二甲苯酚)》.pdf

JIS K 9563-2013 8750 Xylenol orange (Reagent)《二甲酚橙(试剂)》.pdf

TS 1949-1975 PHENOL o - CRESOL m - CRESOL p - CRESOL CRESYLIC ACID AND XYLENOLS FOR INDUSTRIAL USE DETERMINATION OF VVATER BY THE KARL FISCHER METHOD《工业用苯酚、邻甲酚、间甲酚、对甲酚、甲苯基酸和二甲苯酚 用卡.pdf

NBN T 04-283-1985 4375 Cresylic acid and xylenols for industrial use- Determination of -cresol content《工业用甲酚酸和二甲苯酚 甲酚含量的测定》.pdf

TS 1951-1975 PHENOL o CRESOL m - CRESOL p - CRESOL CRESYLIC ACID AND XYLENOLS FOR INDUSTRIAL USE DETERMINATION OF NATURAL OILS AND PYRIDINE BASES《工业用苯酚、邻甲酚、间甲酚、对甲酚、甲苯基酸和二甲苯酚 天然油脂及吡.pdf

猜你喜欢

AGMA 98FTM10-1998 Local Coefficients of Friction in Worm Gear Contacts《蜗轮接触的局部摩擦系数》.pdf

AGMA 98FTM11-1998 Improving Pump Gear Geometry Through Secondary Gear Tooth Finishing《通过二档齿轮齿精整提高泵齿轮的几何精度》.pdf

AGMA 98FTM12-1998 Gear Refurbishment an Economical Approach for Aerospace Overhaul & Repair《齿轮翻新.航空大修和维修的一种经济方法》.pdf

AGMA 98FTM2-1998 Mesh Friction in Gearing《齿轮的啮合摩擦》.pdf

AGMA 98FTM3-1998 Basic Studies on Fatigue Strength of Case-Hardened Gear Steel - Effects of Shot Peening and or Barrelling Processes《渗碳硬化齿轮钢疲劳强度的基本研究.喷丸硬化和 或滚光加工的作用》.pdf

AGMA 98FTM4-1998 Effect of Uncontrolled Heat Treat Distortion on the Pitting Life of Ground Carburized and Hardened Gears《不受控制的热处理变形对于磨光 渗碳和硬化齿轮的点蚀寿命的影响》.pdf

AGMA 98FTM5-1998 Low Vibration Design on a Helical Gear Pair《螺旋齿轮副上的低振动设计》.pdf

AGMA 98FTM6-1998 Calibration of Master Gears on Coordinate Measurement Machines《坐标量测设备上的主齿轮的校准》.pdf

AGMA 98FTM7-1998 Checker of 3D Form Accuracy of Hypoid & Bevel Gear Teeth for the new Generation and Quality Control《新一代和质量控制用准双曲面的和伞形齿轮齿的3D形状精度检查》.pdf