GB T 37851-2019 玻璃容器 小口瓶标准公差.pdf

相关资源

GB T 37869.4-2019 玻璃容器 真空凸缘瓶口 第4部分：三旋38中等规格.pdf

GB T 37852-2019 玻璃容器 以容器底部作基准的高度和口部不平行度 试验方法.pdf

GB T 37855-2019 玻璃容器 26H126冠形瓶口尺寸.pdf

GB T 37869.3-2019 玻璃容器 真空凸缘瓶口 第3部分：三旋38普通规格.pdf

GB T 37856-2019 玻璃容器 26H180冠形瓶口尺寸.pdf

猜你喜欢

ASTM D7244-2006a Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings《保持能量油墨和涂料的相对保持力的标准试验方法》.pdf

ASTM D7244-2006a(2011) 5625 Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings《能量处理墨水和涂覆的相对处理标准试验方法》.pdf

ASTM D7245-2007 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating《测定含水总量和加热产生固化水的液体涂层中挥发物含量的标准试验方法》.pdf

ASTM D7245-2007e1 837 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating.pdf

ASTM D7245-2009 346 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating《测定含水总量和加热产生固化水的液体涂层中挥发物含量的标准试验方法》.pdf

ASTM D7245-2009(2014) 5181 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating《测定含水总量和加热产生固化水的液体涂层中挥发物含量的标准试验方法》.pdf

ASTM D7246-2006 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves《检测聚乙烯食品服务手套上小孔的标准试验方法》.pdf

ASTM D7246-2006(2011)e1 3819 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves《检测食品行业用聚乙烯手套上破洞的标准试验方法》.pdf

ASTM D7246-2006(2015) 2156 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves《检测食品行业用聚乙烯手套漏孔的标准试验方法》.pdf