SY T 7473-2020 油气输送管道通信系统设计规范.pdf

相关资源

GB T 19294-2003 航空摄影技术设计规范.pdf

YD 5206-2014 宽带光纤接入工程设计规范.pdf

YD 5076-2014 固定电话交换网工程设计规范.pdf

JTG D50-2017 公路沥青路面设计规范.pdf

JTG T D65-05-2015 公路悬索桥设计规范.pdf

YD 5098-2005 通信局(站)防雷与接地工程设计规范.pdf

YD 5102-2010 通信线路工程设计规范.pdf

GY 5066-2000 电影摄影棚灯光系统设计规范.pdf

AQ 1076-2009 煤矿低浓度瓦斯管道输送安全保障系统设计规范.pdf

猜你喜欢

ASTM D4776-2004e1 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure.pdf

ASTM D4778-2005 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《在传热条件下测定冷却水的腐蚀和污染倾向的标准试验方法》.pdf

ASTM D4778-2010 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《在热转换条件下测定冷却水的腐蚀和污染倾向的标准试验方法》.pdf

ASTM D4778-2015 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《测定传热条件下冷却水腐蚀和结垢性的标准试验方法》.pdf

ASTM D4780-1995(2007) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂的低表面面积的标准试验方法》.pdf

ASTM D4780-2012 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂及催化剂载体的低表面面积的标准试验方法》.pdf

ASTM D4780-2012(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂的低表面面积的试验方法》.pdf

ASTM D4781-2003 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles《精细催化剂颗粒和催化剂载体颗粒的机械振实填充密度的标准试验方法》.pdf

ASTM D4781-2003(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles《催化剂细粒和催化剂载体粒子机械振动堆积密度的标准试验方法》.pdf