DB14 T 1162-2024 舍饲育肥羊全混合颗粒饲料生产技术规程.pdf

相关资源

JB T 6944-1993 颗粒饲料压制机 压模安装型式与尺寸.pdf

JB T 7141-1993 颗粒饲料分级筛 试验方法.pdf

JB T 51072-1999 颗粒饲料压制机 产品质量分等（内部使用）.pdf

SC T 6011-2001 平模颗粒饲料压制机 技术条件.pdf

SC T 6012-2002 平模颗粒饲料压制机试验方法.pdf

JB T 11254-2011 立式颗粒饲料稳定器.pdf

JB T 11925-2014 辊式颗粒饲料破碎机.pdf

JB T 5161-1991 颗粒饲料压制机 技术条件.pdf

JB T 5161-2013 颗粒饲料压制机.pdf

JB T 5169-1991 颗粒饲料压制机 试验方法.pdf

猜你喜欢

SAE AS 6194-2011 FITTING ASSEMBLY TEE AXIALLY SWAGED FEMALE FLARELESS ON THE RUN AXIALLY SWAGED ON THE SIDE HYDRAULIC UP TO 1500 PSI《液压达达1500 PSI的侧边轴向型锻内螺纹无扩口轴向型锻三通管接头组件》.pdf

SAE AS 6195-2011 FITTING ASSEMBLY TEE MALE FLARELESS BULKHEAD FLARELSS ON THE RUN AXIALLY SWAGED ON THE SIDE HYDRAULIC UP TO 1500 PSI《液压达1500 PSI的侧边轴向型锻 外螺纹无扩口闷头三通管接头组件》.pdf

SAE AS 620 SUP 1-1998 Hose Assemblies Convoluted Polytetrafluoroethylene Metallic Reinforced High Temperature Medium Pressure Aircraft (Supplement 1)《飞行器用高温中压金属增强的盘绕聚四氟乙烯软管组件(补充件1).pdf

SAE AS 6203-2013 O-RING MOLDED FROM AMS7379 RUBBER FOR USE WITH AS5202 PORTS《由AMS 7379标准橡胶模制的与AS 5205标准端口一起使用的O型环》.pdf

SAE AS 6203A-2016 O-RING MOLDED FROM AMS7379 RUBBER FOR USE WITH AS5202 PORTS.pdf

SAE AS 620G-2012 Hose Assemblies Convoluted Polytetrafluoroethylene Metallic Reinforced High Temperature Medium Pressure Aircraft《航空器中等压力高温曲聚四氟乙烯金属增强的软管组件 n n》.pdf

SAE AS 6213-2012 FITTING ADAPTER PORT REDUCER 37 DEGREE SPHERICAL FLARED《扩口37度球形减径端口适配器配件》.pdf

SAE AS 621C-2001 HOSE ASSEMBLY 3000 psi PTFE FLARELESS STRAIGHT TO STRAIGHT HEAVYWEIGHT《3000 psi PTFE 非扩口 直通对直通的加厚软管组件》.pdf

SAE AS 6224 1-2015 REPAIR SLEEVE PRIMARY WIRE INSULATION DAMAGE ELECTRIC PERMANENT ENVIRONMENT RESISTANT 150 MAXIMUM OPERATING TEMPERATURE.pdf