DB36 T 2045-2024 主要林木品种审定规范.pdf

相关资源

DB15 T 311—2020 主要林木品种审定规范.pdf

DB51 T 2251-2016 主要林木品种审定规范.pdf

猜你喜欢

FORD WSK-M4D838-A-2006 POLYETHERETHERKETONE (PEEK) SELF-EXTINGUISHING (SE) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚醚醚酮（PEEK）自熄灭型（SE）成型料 与标准FORD WSS-M99P1111-A一起使用》.pdf

FORD WSK-M4D839-A-2006 ACETAL (POM) COPOLYMER ELASTOMER MODIFIED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用乙缩醛共聚物（POM）弹性体改性成型料 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSK-M4D840-A1-2006 ACETAL (POM) COPOLYMER MELT FLOW RATE 5 - 11 INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用熔体流动速率为5-11的乙缩醛共聚物（POM） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D840-A2-2006 ACETAL (POM) COPOLYMER MELT FLOW RATE 11 - 16 INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D840-A1)《汽车内部用熔体流动速率为11-16的乙缩醛共聚物(POM) 与标准FORD.pdf

FORD WSK-M4D840-A3-2011 ACETAL (POM) COPOLYMER MELT FLOW RATE 29 - 35 INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D840-A1)《内部熔态流动率为29-35的乙缩醛(POM)共聚物 与福特WSS.pdf

FORD WSK-M4D843-A2-2010 POLYPHTHALAMIDE (PPA) IMPACT MODIFIED 34% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《34%玻璃纤维增强的冲击改性聚邻苯二甲酰胺(PPA)成型料 与标准F.pdf

FORD WSK-M4D844-A7-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) HIGH HEAT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《耐高温聚苯醚+聚苯乙烯（PPE+PS）混合物成型料 与标准FORD WSS-M9.pdf

FORD WSK-M4D844-A9-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS) IMPACT RESISTANT MOLDING COMPOUND《聚苯醚+聚苯乙烯混合物（PPE+PS）耐冲击成型料》.pdf

FORD WSK-M4D848-A-2010 POLYCARBONATE + POLYBUTYLENE THEREPHTHALATE BLEND (PC+PBT) SHEET 30% LONG GLASS FIBERS REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《30%长玻璃纤维增强的聚碳酸酯+聚对苯二.pdf