DB41 T 2767-2024 水文测站通信设计规范.pdf

相关资源

GB T 19294-2003 航空摄影技术设计规范.pdf

YD 5206-2014 宽带光纤接入工程设计规范.pdf

YD 5076-2014 固定电话交换网工程设计规范.pdf

JTG D50-2017 公路沥青路面设计规范.pdf

JTG T D65-05-2015 公路悬索桥设计规范.pdf

YD 5098-2005 通信局(站)防雷与接地工程设计规范.pdf

YD 5102-2010 通信线路工程设计规范.pdf

GY 5066-2000 电影摄影棚灯光系统设计规范.pdf

AQ 1076-2009 煤矿低浓度瓦斯管道输送安全保障系统设计规范.pdf

GA T 515.2-2011 公安交通指挥系统设计规范第2部分：省（自治区）公安交通指挥系统.pdf

猜你喜欢

ASTM C944 C944M-2012 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method《用旋转切割机法对混凝土或砂浆表面耐磨性的标准试验方法》.pdf

ASTM C944-1999(2005) Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method《用旋转切割机法对混凝土或砂浆表面耐磨性的试验方法》.pdf

ASTM C945-2005 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels《室外容器上刚性蜂窝式聚氨酯绝缘系统的设计考.pdf

ASTM C945-2005(2012) Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels 《露天使用容器上刚性泡沫聚氨酯.pdf

ASTM C945-2005(2017) Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels《室外容器上刚性蜂窝状聚氨基甲酸.pdf

ASTM C946-1991(2001) Standard Practice for Construction of Dry-Stacked Surface-Bonded Walls《干式堆积的表面粘结的墙的构造》.pdf

ASTM C946-2010 Standard Practice for Construction of Dry-Stacked Surface-Bonded Walls《干式堆积表面粘结墙的构造用标准实施规程》.pdf

ASTM C946-2018 Standard Practice for Construction of Dry-Stacked Surface-Bonded Walls.pdf

ASTM C947-2003 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)《薄剖面玻璃纤维增强混凝土挠曲特性的试验方法(使用1 3.pdf