1、IEEE Guide for the Application of Tertiary and Stabilizing Windings in Power Transformers IEEE Std C57.158-2017 IEEE Power and Energy Society Sponsored by the Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std C57.158-2017 IEEE Guide for the Application of Tertiary and Sta
2、bilizing Windings in Power Transformers Sponsor Transformers Committee of the IEEE Power and Energy Society Approved 6 December 2017 IEEE-SA Standards Board Copyright 2018 IEEE. All rights reserved. 2 Acknowledgments: The working group members wish to recognize the following individuals for supporti
3、ng this work: Stephen Anthony, Saurabh Ghosh, Roger Hayes, Dennis Marlow, Bipin Patel, Vallamkonda Sankar, Jin Sim, and Steve L. Snyder. Abstract: The application of tertiary and stabilizing windings in liquid-immersed power transformers, as covered by IEEE Std C57.12.00, as well as recommendations
4、to evaluate the need or convenience of having such windings, are addressed in this guide. The primary application of this guide is for transformers and autotransformers with wye-wye-connected windings, with or without a delta-connected tertiary or stabilizing winding. Tertiary windings in convention
5、al delta-wye and delta-deltaconnected transformers are not addressed by this guide. Keywords: buried tertiary, IEEE C57.158, stabilizing winding, tertiary, unbalanced loading of transformers, wye-wye-connected transformers, Y-Y transformers connection The Institute of Electrical and Electronics Engi
6、neers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 27 April 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purp
7、ose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly
8、voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is s
9、ubject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE un
10、dertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent profess
11、ional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINE
12、SS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHE
13、THER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Copyright 2018 IEEE. A
14、ll rights reserved. 4 Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be rel
15、ied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Commen
16、ts on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should
17、 be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE a
18、nd the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would
19、 like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documen
20、ts should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements.
21、 IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are
22、made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available f
23、or use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or org
24、anizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educatio
25、nal classroom use can also be obtained through the Copyright Clearance Center. Copyright 2018 IEEE. All rights reserved. 5 Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may
26、be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at lea
27、st every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the late
28、st edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously.
29、For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users
30、are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or
31、 validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance
32、may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Pate
33、nt Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms
34、or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such right
35、s, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. 6 Copyright 2018 IEEE. All rights reserved. Participants At the time this IEEE guide was completed, the Application of Tertiary and Stabilizing Windings Working Group had the following m
36、embership: Enrique Betancourt, Chair Brian Penny, Vice Chair Marnie Roussell, Secretary Richard Amos Bill Boettger Jagdish Burde James P. Campbell Frank Damico Hugo Flores Jinho Kang Krzysztof Kulasek Randall Kyle Xose M. Lopez-Fernandez Tamyres L. Machado Douglas McCullough Amit Mukerji Shankar Nam
37、bi David Ostrander Sanjay Y. Patel Subhas Sarkar Devki Sharma Hemchandra Shertukde Jason Varnell Kiran Vedante K. Vijayan Dharam Vir Sukhdev Walia Jeffrey Wright The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or ab
38、stention. Frank DAmico Dieter Dohnal Gary Donner Joseph Foldi Marcel Fortin Carlos Gaytan James Graham Stephen Grier Randall Groves Ajit Gwal John Harley Timothy Hayden Roger Hayes Werner Hoelzl Gary Hoffman Philip Hopkinson Mohammad Iman Richard Jackson John John Stephen Jordan Laszlo Kadar Gael Ke
39、nnedy Sheldon Kennedy Gary King James Kinney Zan Kiparizoski Gary Kobet Hermann Koch Boris Kogan Axel Kraemer Neil Kranich Jim Kulchisky John Lackey Chung-Yiu Lam Thomas La Rose Aleksandr Levin Albert Livshitz Thomas Lundquist Reginaldo Maniego Richard Marek J. Dennis Marlow Omar Mazzoni William McB
40、ride Mark McNally Charles McShane Daniel Mulkey R. Jay Murphy Ryan Musgrove K. R. M. Nair Arun Narang Kris K. Neild Michael Newman Joe Nims Lorraine Padden Klaus Papp Bansi Patel Christopher Petrola Klaus Pointner Alvaro Portillo Bertrand Poulin Iulian Profir Timothy Charles Raymond Jean-Christophe
41、Riboud Charles Rogers Thomas Rozek Dinesh Sankarakurup Roderick Sauls Bartien Sayogo Stephen Schroeder Nikunj Shah Devki Sharma Hemchandra Shertukde Hyeong Sim Jerry Smith Steve Snyder K. Stump Ed teNyenhuis Juan Thierry Michael Thompson Joe Uchiyama Jason Varnell Kiran Vedante Roger Verdolin John V
42、ergis Jane Verner David Wallach John Wang Joe Watson Kenneth White Jackie Wilson Jeffrey Wright Baitun Yang Jian Yu 7 Copyright 2018 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this guide on 6 December 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Ho
43、ffman, Vice Chair John Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus
