1、BRITISH STANDARD BS ISO 8118-1:2006 Textile machinery Weaving machine temples Part 1: Temple cylinders ICS 59.120.30 BS ISO 8118-1:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 3 February 2006 BSI 3 February 2006 ISBN 0 580 47162 4 Nat
2、ional foreword This British Standard reproduces verbatim ISO 8118-1:2006 and implements it as the UK national standard. It supersedes BS ISO 8118:1986 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has the responsibil
3、ity to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standa
4、rds Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard
5、does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European develo
6、pments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the documen
7、t was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 8118-1:2006(E)INTERNATIONAL STANDARD ISO 8118-1 First edition 2006-01-15 Textile machinery Weaving machine temples Part 1: Temple cylinders Machines tisser Templets pour mtiers et machines tisser Parti
8、e 1: Cylindres de templets BS ISO 8118-1:2006ii iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Ea
9、ch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internatio
10、nal Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standar
11、ds adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject
12、of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8118-1 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry- cleaning and industrial laundering, Subcommittee SC 3, Machinery for fabric manufacturing including pr
13、eparatory machinery and accessories. This first edition of ISO 8118-1, together with ISO 8118-2, cancels and replaces ISO 8118:1986, of which it constitutes a technical revision. ISO 8118 consists of the following parts, under the general title Textile machinery Weaving machine temples: Part 1: Temp
14、le cylinders Part 2: Full-width temples BS ISO 8118-1:2006blank 1 Textile machinery Weaving machine temples Part 1: Temple cylinders 1 Scope This part of ISO 8118 defines the basic terms and gives the nomenclature, technical specifications and designation for weaving machine temple cylinders used in
15、 the textile industry. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 temple cylinder device used in weaving to pull the cloth to the width of the warp in the reed and which is positioned as near as possible to the fell of the cloth See Figu
16、re 1. 2.2 ring revolving element of the temple cylinder which works independently of, or in addition to, other parts of the temple cylinder See Figure 1. 2.3 roller revolving element of the temple cylinder which works independently of, or in addition to, other parts of the temple cylinder See Figure
17、 1. BS ISO 8118-1:20062 3 Nomenclature Figure 1 identifies temple cylinder components and dimensions. Key b ring width 1 axle d 1axle diameter 2 end ellipse (can be single piece or composed of elements 3 and 7) d 2ring diameter 3 ellipse d 3bore diameter 4 head piece t protruding pin length 5 selved
18、ge ring d 4roller inside diameter 6 ring d 5roller diameter 7 bevelled disc l roller length 8 roller a9 pin 10 spacer bush NOTE For the values of dimensions, see Tables 1 and 2. aAny additional identification is determined by the outer structure of the roller, e.g. “rubber roller”, “brass roller”. F
19、igure 1 Temple cylinder nomenclature Components and dimensions BS ISO 8118-1:2006 3 4 Specifications 4.1 Axle diameter The axle diameter d 1shall be 10 mm. 4.2 Rings (complete) The rings shall be in accordance with Table 1. Table 1 Specification of rings Dimensions in millimetres Ring series Nominal
20、 diameter Number of pin rows Total number of pins t d 2d 3b 1 18 0,5-0,75-1,00 1,25-1,50-1,75 24 16 4,4 2 30 36 48 60 72 1,50-1,75 1,25 1,0 0,75 0,50 24 16 4,4 3 54 72 90 108 1,25 1,0 0,75 0,5-0,3 24 16 4,4 4 72 96 120 144 1,25-1,5-1,75 1,0 0,75 0,50 24 17 6,0 A 24 5 90 120 150 180 1,25-1,5-1,75 1,0
21、 0,75 0,50 25 17 6,0 1 24 0,5-0,75-1,0 1,25-1,5-1,75 23 15,1 3,5 2 24 30 36 48 1,75-2,0 1,5 1,25 0,5-0,75-1,0-1,25 23 15,1 3,5 3 72 1,25-1,5 23 16,1 5,7 4 96 132 0,5-0,75-1,0 0,5-0,75-1,0 23 16,1 5,7 B 23 5 150 1,0 24 16,1 7,0 bC a17 3 72 0,5-0,75-1,0-1,25 17 12 4,8 aThese dimensions should be avoid
22、ed for new constructions. bFor conterschon, as an alternative to two parallel broad selvedge rings, two opposite rings may be used. BS ISO 8118-1:20064 4.3 Rollers The rollers shall be in accordance with Table 2. Table 2 Specification of rollers Dimensions in millimetres Roller series Outer material
23、 Outer structure Outside diameter d 5Inside diameter d 4Length A 24 26 14 14 l B Rubber Brass Steel Synthetic Smooth Radial Grooved Coarse thread LH/RH Fine thread LH/RH Beaten surface 22 24 14,1 14,1 l 5 Designation The designation of a temple cylinder ring shall provide the following information,
24、in the order given: a) “Ring of the temple cylinder”; b) reference to this part of ISO 8118 (i.e. “ISO 8118-1”); c) the series to which the ring belongs and the number of pin rows; d) the total number of pins; e) the pin length protrusion t; f) the ring width b; g) the shape of the pin-point (sharp
25、or blunt). EXAMPLE A temple cylinder ring of ring series A with two pin rows, a total number of pins of 48, a protruding length of 1,0 mm, a ring width of 4,4 mm and a blunt pin point shall be designated as follows: Ring of the temple cylinder ISO 8118-1 A2 48 1,0 4,4 blunt BS ISO 8118-1:2006blankBS
26、 ISO 8118-1:2006 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions
27、British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguit
28、y while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that su
29、bscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from t
30、he BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, Eu
31、ropean and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048.
32、Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: memb
33、ershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the
34、 UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without p
35、rior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
