1、BRITISH STANDARD BS ISO 8121:2007 Textile machinery Knitting machines Nameplate information ICS 59.120.40 BS ISO 8121:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 September 2007 BSI 2007 ISBN 978 0 580 56356 0 National foreword Thi
2、s British Standard is the UK implementation of ISO 8121:2007. It supersedes BS ISO 8121:1986 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery. A list of organizations represented on this committee can be obtained on request to
3、 its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. Date Comments Ref
4、erence number ISO 8121:2007(E)INTERNATIONAL STANDARD ISO 8121 Second edition 2007-08-01 Textile machinery Knitting machines Nameplate information Matriel pour lindustrie textile Machines tricoter Caractristiques des plaques didentification BS ISO 8121:2007 ii iiiForeword ISO (the International Organ
5、ization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been establish
6、ed has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
7、 International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Pu
8、blication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such paten
9、t rights. This second edition cancels and replaces the first edition (ISO 8121:1986), which has been technically revised. It also incorporates the Technical Corrigendum ISO 8121:1986/Cor. 1:1992. BS ISO 8121:2007 blank 1Textile machinery Knitting machines Nameplate information 1 Scope This Internati
10、onal Standard specifies the minimum information for the nameplates on knitting machines used in the textile industry. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated re
11、ferences, the latest edition of the referenced document (including any amendments) applies. ISO 8117, Textile machinery Knitting machines Nominal diameters of circular machines ISO 8122, Textile machinery Knitting machines Number of needles for circular knitting machines of large nominal diameter IS
12、O 8188, Textile machinery and accessories Pitches of knitting machines ISO 8640-1, Textile machinery and accessories Flat warp knitting machines Part 1: Vocabulary of basic structure and knitting elements ISO 11675, Textile machinery and accessories Flatbed knitting machines Vocabulary 3 Nameplate c
13、ontent For identification of a machine, at least the following information shall be specified on the machine nameplate for a) all knitting machines and b) for flat knitting machines or c) circular knitting machines. a) General content manufacturer, including address; type of machine; machine number;
14、 year of construction. b) Flat knitting machines nominal width according to ISO 11675 or ISO 8640-1 as applicable, in millimetres; the nominal width in inches may be added in brackets; pitch in accordance with ISO 8188; the gauge value according to that International Standard may be added in bracket
15、s. BS ISO 8121:20072 c) Circular knitting machines nominal diameter, in millimetres, in accordance with ISO 8117; the characteristic value may be added in brackets; number of needles per needle carrier for large nominal diameters, in accordance with ISO 8122; needle pitch, in millimetres, in accorda
16、nce with ISO 8188; the gauge value according to that International Standard may be added in brackets. BS ISO 8121:2007 blankBS ISO 8121:2007 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It
17、 presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim
18、of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0
19、)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to C
20、ustomer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Brit
21、ish Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give de
22、tails on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of
23、 these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on t
24、he BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored
25、 in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
