1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD AEROSPACE SERIES BS ISO 9
2、747:2000 ICS 49.035 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope Dimensions and loadsThis British Standard, having been prepared under the direction of the Engineering Sector Committe
3、e, was published under the authority of the Standards Committee and comes into effect on 15 March 2001 BSI 03-2001 ISBN 0 580 35047 9 BS ISO 9747:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 9747:2000 and implements i
4、t as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee ACE/14, Aerospace details and parts, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the int
5、erpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards w
6、hich implement international publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport
7、 to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cove
8、r, the ISO title page, pages ii and iii, a blank page, pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.A Referencenumbe r ISO9747:2000 (E) INTERNATIONAL STANDARD ISO 9747 Firstedition 20001215 Aerosp
9、aceDoubleshankballends,in corrosionresistantsteel,swagedon aircraftcontrolwireropeDimensions andloads AronautiqueetespaceEmboutssphrecentrale,enacierrsistant lacorrosion,sertirsurcblesdecommandedaronefsDimensionset chargesISO9747:2000(E) iiISO9747:2000(E) iii Foreword ISO(theInternationalOrganizatio
10、nforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.I
11、nternationalorganizations,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirective
12、s,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO9747waspreparedbyTechnicalCommitteeISO/TC20, Aircraftandspacevehicles, Su
13、bcommitteeSC12, Mechanicalsystemparts . AnnexAformsanormativepartofthisInternationalStandard.INTERNATIONALSTANDARD OISO9747:2000(E) 1 AerospaceDoubleshankballends,incorrosionresistantsteel, swagedonaircraftcontrolwireropeDimensionsandloads 1Scope ThisInternationalStandardspecifiesthecharacteristicso
14、fdoubleshankballendsincorrosionresistantsteelswaged onaircraftcontrolwirerope. 2Normative references Thefollowingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthis InternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepubl
15、icationsdo notapply.However,partiestoagreementsbasedonthisInternationalStandardareencouragedtoinvestigatethe possibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow.Forundatedreferences, thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIECmaintainregiste
16、rsof currentlyvalidInternationalStandards. ISO20201:1997, Aerospace Preformedflexiblesteelwireropeforaircraftcontrols Part 1:Dimensionsand loads. ISO8074:1985, AerospaceSurfacetreatmentofausteniticstainlesssteelparts. ISO10955:1999, AerospaceEndfittingsandturnbarrelsforaircraftcontrolwireropeTechnic
17、alspecification . ISO13715:2000, TechnicaldrawingsEdgesofundefinedshapeVocabularyandindicationondrawings. EN2465: 1) , AerospaceseriesSteelFEPA11SoftenedBars D e 100mm . 2) SAEAMS2431/6A, PeeningMedia,GlassShot. SAEAMS5639G, Steel,CorrosionResistant,Bars,Wire,Forgings,TubingandRings,19Cr10Ni,Solutio
18、nHeat Treated. SAEAMS5641F, Steel,CorrosionResistant,Bars,Wire,andForgings,18.5Cr10Ni0.22SeFreeMachining; SwagingorUpsetting,SolutionHeatTreated. 3 Configuration,dimensions,loadsandmasses Configuration,dimensions,loadsandmassesshallbeinaccordancewithFigure1andTable1. 1) Tobepublished. 2) AECMA.ISO97
19、47:2000(E) 2 Dimensionsinmillimetres Surfaceroughnessinmicrometres Figure1 Table1 Dimensionsinmillimetres Wirerope a D 1 D 2 D 3 D 4 D 5 LR 1 R 2 Mass Minimum breakingload a Code Nominal g/piece diameter 0 01 + , 0 01 + , 0 01 + , -02 0 , 0 05 + , 0,25 0,25 kN 16 1,6 5,5 3,5 1,9 2,2 3 9 0,8 2 0,5 2,
20、15 24 2,4 7 4,5 2,8 3 3,5 13 1 3 1,1 4,45 32 3,2 9 5,5 3,6 4 5 18 1,2 4 2,7 8,9 40 4 11 6,5 4,4 4,9 5,5 22 1,5 3,5 12,45 48 4,8 12,5 7,5 5,2 5,8 6,5 26 1,6 5 5,6 18,6 56 5,6 14 9 6 6,6 7,5 30 2 8,2 24,9 64 6,4 16 10 6,8 7,5 8,5 34 6 12,1 31,2 a InaccordancewithISO20201ISO9747:2000(E) 3 4Material Cor
21、rosionresistantsteel(inaccordancewithannexA). 5Surface treatment Passivation(codeP)inaccordancewithISO8074orpeening(codeG)(inaccordancewithannexA). 6Designation EachballendinaccordancewiththisInternationalStandardshallbedesignatedasshowninthefollowingexample. EXAMPLE 7Marking Inadditiontothemanufact
22、urersownmarking,thepackagingonlyshallbemarkedusingtheidentityblockspecified inclause6. Themarkingmethodisatthemanufacturersoption. 8Technical specification InaccordancewithISO10955.ISO9747:2000(E) 4 AnnexA (normative) Correspondencebetweennationalstandards Thisannexestablishesacorrespondencebetweend
23、ifferentmaterialsandsurfacetreatmentstandardsfromcertain usercountries.Othermemberbodiesareinvitedtodeclaretheirmaterialsandsurfacetreatmentstandardsinthis annex. ThematerialsandprocessescitedinTables A.1andA.2areconsideredtobeequivalent,assumingthatthe requirementsforballendsspecifiedinthisInternat
24、ionalStandardarerespected. TableA.1Europeanstandards Code Material Surfacetreatment Family Standard Nature Standard No Corrosionresistantsteel EN2465 Passivation ISO8074 code Peening SAEAMS2431/6A TableA.2U.S.standards Code Material Surfacetreatment Family Standard Nature Standard No code Corrosionr
25、esistantsteel SAEAMS5639 or Passivation ISO8074 SAEAMS5641 Peening SAEAMS2431/6ABS ISO 9747:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
26、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorpo
27、rated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone
28、 finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS
29、 which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI we
30、bsite at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European an
31、d international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members o
32、f BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website
33、 at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieva
34、l system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations.
35、 If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
