1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS ISO/IEC 25045:2010 Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) Evaluation module for recoverabilityBS ISO/IEC 25045:2
2、010 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 25045:2010. The UK participation in its preparation was entrusted to Technical Committee IST/15, Software and systems engineering. A list of organizations represented on this committee can be obtained on
3、 request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2010 ISBN 978 0 580 66893 7 ICS 35.080 Compliance with a British Standard cannot confer immunity from legal obligations. This Bri
4、tish Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2010. Amendments issued since publication Date Text affectedBS ISO/IEC 25045:2010Reference number ISO/IEC 25045:2010(E) ISO/IEC 2010INTERNATIONAL STANDARD ISO/IEC 25045 First edition 2010-0
5、9-01 Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) Evaluation module for recoverability Ingnierie des systmes et du logiciel Exigences de qualit et valuation des systmes et du logiciel (SQuaRE) Module dvaluation pour la possibilit de rcupration BS
6、 ISO/IEC 25045:2010 ISO/IEC 25045:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performi
7、ng the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF f
8、ile can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secr
9、etariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in
10、writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2010 All rights reservedBS
11、 ISO/IEC 25045:2010 ISO/IEC 25045:2010(E) ISO/IEC 2010 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 1.1 Characteristics.1 1.2 Level of evaluation 1 1.3 Technique.1 1.4 Applicability .2 2 Conformance .2 3 Normative references2 4 Terms and definitions .3 5 Inputs and measur
12、es.3 5.1 Evaluation methodology.3 5.1.1 Practical considerations relating to the methodology 5 5.1.2 Disturbances5 5.2 Input for the evaluation.8 5.2.1 The SUT description8 5.2.2 The workload description.9 5.2.3 The fault load description.10 5.3 Data elements 11 5.3.1 Output from the baseline run .1
13、1 5.3.2 Output from the test run .11 5.3.3 Completion of the Autonomic Maturity Questionnaire12 5.4 Quality Measures.12 5.4.1 Summary of the Quality Measures and Quality Measure Elements (QME) .12 5.4.2 Quality Measure - Resiliency12 5.4.3 Quality Measure - Autonomic Recovery Index.13 5.4.4 Quality
14、Measure Element (QME) - Number of transactions under disturbance.15 5.4.5 Quality Measure Element (QME) - Number of transactions under no disturbance 16 5.4.6 Quality Measure Element (QME) - Autonomic Maturity Score16 6 Interpretation of results 17 6.1 Mapping of measures17 6.2 Reporting17 6.3 Appli
15、cation Procedure 17 Annex A (informative) Sample Report .18 Bibliography37 BS ISO/IEC 25045:2010 ISO/IEC 25045:2010(E) iv ISO/IEC 2010 All rights reservedForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized sys
16、tem for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees c
17、ollaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Stand
18、ards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publicatio
19、n as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such pat
20、ent rights. ISO/IEC 25045 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 7, Software and systems engineering. ISO/IEC 25045 is one of the SQuaRE series of International Standards, which consists of the following divisions under the general title Syst
21、ems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE): Quality Management Division (ISO/IEC 2500n), Quality Model Division (ISO/IEC 2501n), Quality Measurement Division (ISO/IEC 2502n), Quality Requirements Division (ISO/IEC 2503n), Quality Evaluation Divisio
22、n (ISO/IEC 2504n). BS ISO/IEC 25045:2010 ISO/IEC 25045:2010(E) ISO/IEC 2010 All rights reserved vIntroduction The evaluation of software product quality is vital to both the acquisition and development of software that meets quality requirements. The relative importance of the various characteristic
23、s of software quality depends on the mission or objectives of the system of which it is a part; software products need to be evaluated to decide whether relevant quality characteristics meet the requirements of the system. The essential parts of software quality evaluation are a quality model, the m
24、ethod of evaluation, software measurement, and supporting tools. To develop good software, quality requirements should be specified, the software quality assurance process should be planned, implemented and controlled, and both intermediate products and end products should be evaluated. This Interna
25、tional Standard is part of the SQuaRE series of International Standards. It contains general requirements for specification and evaluation of systems and software quality and clarifies the associated general concepts. It provides a framework for evaluating the quality of software products and states
26、 the requirements for methods of software product measurement and evaluation. The general goal of creating the SQuaRE series of International Standards is to move to a logically organized, enriched and unified series covering two main processes: software quality requirements specification and softwa
27、re quality evaluation, supported by a software quality measurement process. The purpose of the SQuaRE series of International Standards is to assist those developing and acquiring software products with the specification and evaluation of quality requirements. It establishes criteria for the specifi
28、cation of systems and software quality requirements, their measurement, and evaluation. It includes a two-part quality model for aligning customer definitions of quality with attributes of the development process. In addition, the series provides recommended measures of software product quality attr
29、ibutes that can be used by developers, acquirers, and evaluators. SQuaRE provides terms and definitions, reference models, a general guide, individual division guides, and International Standards for requirements specification, planning and management, measurement and evaluation purposes. SQuaRE inc
30、ludes International Standards on quality model and measures, as well as on quality requirements and evaluation. SQuaRE replaces the current ISO/IEC 9126 series and the ISO/IEC 14598 series. ISO/IEC 25040, Systems and software engineering Systems and software Quality Requirements and Evaluation (SQua
31、RE) Evaluation reference model and guide will replace a part of ISO/IEC 14598-1, Information technology Software product evaluation Part 1: General overview. ISO/IEC 25041, Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) Evaluation modules will repl
32、ace ISO/IEC 14598-6, Software engineering Product evaluation Documentation of evaluation modules. ISO/IEC 25001, Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Planning and management replaces ISO/IEC 14598-2, Software engineering Product evaluation Part 2: Planni
33、ng and management. BS ISO/IEC 25045:2010 ISO/IEC 25045:2010(E) vi ISO/IEC 2010 All rights reservedQuality Requirements Division 2503n Quality Evaluation Division 2504n Quality Model Division 2501n Quality Measurement Division 2502n Quality Management Division 2500nFigure 1 Organization of the SQuaRE
34、 series of International Standards Figure 1 illustrates the organization of the SQuaRE series, representing families of standards, also called divisions. The divisions within SQuaRE model are: ISO/IEC 2500n - Quality Management Division. The International Standards that form this division define all
35、 common models, terms and definitions further referred to by all other International Standards from the SQuaRE series. Referring paths (guidance through SQuaRE documents) and high level practical suggestions in applying proper standards to specific application cases offer help to all types of users.
36、 The division also provides requirements and guidance for a supporting function which is responsible for the management of software product requirements specification and evaluation. ISO/IEC 2501n - Quality Model Division. The International Standard that forms this division presents a detailed quali
37、ty model including internal, external and quality in use characteristics. Furthermore, the internal and external software quality characteristics are decomposed into sub-characteristics. Practical guidance on the use of the quality model is also provided. ISO/IEC 2502n - Quality Measurement Division
38、. The International Standards that form this division include a software product quality measurement reference model, mathematical definitions of quality measures, and practical guidance for their application. Presented measures apply to internal software quality, external software quality and quali
39、ty in use. Measurement primitives forming foundations for the latter measures are defined and presented. ISO/IEC 2503n - Quality Requirements Division. The International Standard that forms this division helps in specifying quality requirements. These quality requirements can be used in the process
40、of quality requirements elicitation for a software product to be developed or as input for an evaluation process. The requirements definition process is mapped to technical processes defined in ISO/IEC 15288, Systems and software engineering System life cycle processes. ISO/IEC 2504n - Quality Evalu
41、ation Division. The International Standards that form this division provide requirements, recommendations and guidelines for software product evaluation, whether performed by evaluators, acquirers or developers. The support for documenting a measure as an Evaluation Module is also presented. BS ISO/
42、IEC 25045:2010 ISO/IEC 25045:2010(E) ISO/IEC 2010 All rights reserved viiThis International Standard is part of the Quality Evaluation Division (ISO/IEC 2504n), which consists of the following International Standards (see Figure 2). ISO/IEC 25040 1) , Systems and software engineering Systems and sof
43、tware Quality Requirements and Evaluation (SQuaRE) Evaluation reference model and guide, contains general requirements for specification and evaluation of software quality and clarifies the general concepts. It provides a process description for evaluating the quality of software products and states
44、 the requirements for the application of this process. The evaluation process is the basis for software product quality evaluation for different purposes and approaches. Therefore, the process can be used for the evaluation of quality in use, external software quality and internal software quality.
45、It can also be applied to evaluate the quality of pre- developed software or custom software during its development process. The software product quality evaluation can be conducted by an acquirer, a developer organization, a supplier or an independent third party evaluator. ISO/IEC 25041 2) , Syste
46、ms and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) Evaluation modules, defines the structure and content of the documentation to be used to describe an evaluation module. These evaluation modules contain the specification of the quality model (i.e. characte
47、ristics, sub-characteristics and corresponding internal, external or quality in use measures), the associated data and information about the planned application of the model and the information about its actual application. Appropriate evaluation modules are selected for each evaluation. In some cas
48、es, it might be necessary to develop new evaluation modules. Guidance for developing new evaluation modules is found in ISO/IEC 25041. This International Standard can also be used by organizations producing new evaluation modules. ISO/IEC 25045, Systems and software engineering Systems and software
49、Quality Requirements and Evaluation (SQuaRE) Evaluation module for recoverability provides the specification to evaluate the sub-characteristic of recoverability defined under the characteristic of reliability of the quality model. The ability of a software product and thereby a system to remain available or to recover within an acceptable timeframe from disturbance has always been important since a down time often has economic and other consequences. The em
