1、BSI Standards Publication BS ISO/IEC 29341-12-11:2015 Information technology UPnP Device Architecture Part 12-11: Remote User Interface Device Control Protocol - Remote User Interface Server ServiceBS ISO/IEC 29341-12-11:2015 BRITISH STANDARD National foreword This British Standard is the UK impleme
2、ntation of ISO/IEC 29341-12-11:2015. The UK participation in its preparation was entrusted to Technical Committee IST/6, Data communications. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necess
3、ary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 88293 7 ICS 35.200 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard w
4、as published under the authority of the Standards Policy and Strategy Committee on 31 July 2015. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dInformation technology UPnP Device Architecture Remote User Interface Device Control Part 12-11: Protocol - Remote User Interfac
5、e Server Service Technologies de linformation Architecture de dispositif UPnP Partie 12-11: Protocole de contrle de dispositif dinterface utilisateur distance Service serveur dinterface utilisateur distance INTERNATIONAL STANDARD ISO/IEC 29341-12-11 Reference number ISO/IEC 29341-12-11:2015(E) Secon
6、d edition 2015-06-15 ISO/IEC 2015 BS ISO/IEC 29341-12-11:2015ii ISO/IEC 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or m
7、echanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 74
8、9 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ISO/IEC 29341-12-11:2015(E)BS ISO/IEC 29341-12-11:2015 CONTENTS Foreword iv Introduction . v 1. Scope 1 2. Normative References 1 3. Service Modeling Definitions . 2 3.1. ServiceType . 2 3.2. State Variabl
9、es . 2 3.2.1. UIListingUpdate 2 3.2.2. A_ARG_TYPE_DeviceProfile . 2 3.2.3. A_ARG_TYPE_URI 3 3.2.4. A_ARG_TYPE_CompatibleUIs . 3 3.2.5. A_ARG_TYPE_String . 3 3.2.6. A_ARG_TYPE_Int 3 3.3. Eventing and Moderation . 3 3.4. Actions 4 3.4.1. GetCompatibleUIs . 4 3.4.2. SetUILifetime 5 3.4.3. Non-Standard
10、Actions Implemented by a UPnP Vendor 6 3.4.4. Relationships Between Actions . 6 3.4.5. Common Error Codes . 6 4. Theory of Operation 7 4.1. Example Values of State Variables 7 4.1.1. A_ARG_TYPE_URI 7 4.1.2. A_ARG_TYPE_CompatibleUIs . 7 4.1.3. A_ARG_TYPE_DeviceProfile . 11 4.1.4. UIListingUpdate 12 4
11、.1.5. UIFilter Examples 12 5. A_ARG_TYPE_CompatibleUIs XSD Schema 14 6. DeviceProfile XSD Schema 15 7. XML Service Description 16 LIST OF TABLES Table 1: Service State Variables 2 Table 2: Event moderation 3 Table 3: Actions 4 Table 4: Arguments for GetCompatibleUIs() . 4 Table 5: Arguments for SetU
12、ILifetime() 5 Table 6: Common Error Codes. 6 Table 7: shortName values for known remoting protocols . 10 ISO/IEC 29341-12-11:2015(E)BS ISO/IEC 29341-12-11:2015 For ewor d ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the special
13、ized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical comm
14、ittees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedu
15、res used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules
16、 of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent
17、rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an
18、 explanation on the meaning of the ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information ISO/IEC 29341-12-11 was prepare
19、d by UPnP Implementers Corporation and adopted, under the PAS procedure, by joint technical committee ISO/IEC JTC 1. Information technology, in parallel with its approval by national bodies of ISO and IEC. This second edition replaces the first edition (ISO/IEC 29341-12-11:2008), which has been tech
20、nically revised. The list of all currently available parts of ISO/IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be found on the ISO web site. ISO/IEC 29341-12-11:2015(E)BS ISO/IEC 29341-12-11:2015 I ntroduction ISO and IEC draw attention to the fact t
21、hat it is claimed that compliance with this document may involve the use of patents as indicated below. ISO and IEC take no position concerning the evidence, validity and scope of these patent rights. The holders of - these patent rights have assured ISO and IEC that they are willing to negotiate li
22、censes under reasonable and non- discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with ISO and IEC. Intel Corporation has informed ISO and IEC that it has patent applications or granted pate
23、nts. Information may be obtained from: Intel Corporation Standards Licensing Department 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Oregon 97124 Microsoft Corporation has informed ISO and IEC that it has patent applications or granted patents as listed below: 6101499 / US; 6687755 / US; 691
24、0068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed ISO and IEC that it has patent applications or granted patents. Information may be
25、obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205 466 / US Information may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed ISO and IEC that
26、 it has patent applications or granted patents. Information may be obtained from: ISO/IEC 29341-12-11:2015(E)BS ISO/IEC 29341-12-11:2015 Digital Media Business, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Attention is drawn to the possibility that some of the
27、elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Original UPnP Document Reference may be made in this document to original UPnP documents. These references are ret
28、ained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation. The following table indicates the original UPnP document titles and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture
29、 1.0 ISO/IEC 29341-1 UPnP Basic:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UPnP ContentDi
30、rectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 29341-3-13 UPnP MediaRenderer:2 Device ISO/IEC 29341-4-2 UPnP MediaServer:2 Device ISO/IEC 29341-4-3 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4 UPnP AVTransport:2 Service ISO/IEC 29341-4-10 UPnP ConnectionManager:2
31、Service ISO/IEC 29341-4-11 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13 UPnP ScheduledRecording:1 ISO/IEC 29341-4-14 UPnP DigitalSecurityCamera:1 Device ISO/IEC 29341-5-1 UPnP DigitalSecurityCameraMotionImage:1 Service ISO/IEC 29341-5-10 UPnP
32、DigitalSecurityCameraSettings:1 Service ISO/IEC 29341-5-11 UPnP DigitalSecurityCameraStillImage:1 Service ISO/IEC 29341-5-12 UPnP HVAC_System:1 Device ISO/IEC 29341-6-1 UPnP HVAC_ZoneThermostat:1 Device ISO/IEC 29341-6-2 UPnP ControlValve:1 Service ISO/IEC 29341-6-10 UPnP HVAC_FanOperatingMode:1 Ser
33、vice ISO/IEC 29341-6-11 UPnP FanSpeed:1 Service ISO/IEC 29341-6-12 UPnP HouseStatus:1 Service ISO/IEC 29341-6-13 UPnP HVAC_SetpointSchedule:1 Service ISO/IEC 29341-6-14 UPnP TemperatureSensor:1 Service ISO/IEC 29341-6-15 UPnP TemperatureSetpoint:1 Service ISO/IEC 29341-6-16 UPnP HVAC_UserOperatingMo
34、de:1 Service ISO/IEC 29341-6-17 UPnP BinaryLight:1 Device ISO/IEC 29341-7-1 UPnP DimmableLight:1 Device ISO/IEC 29341-7-2 UPnP Dimming:1 Service ISO/IEC 29341-7-10 UPnP SwitchPower:1 Service ISO/IEC 29341-7-11 UPnP InternetGatewayDevice:1 Device ISO/IEC 29341-8-1 UPnP LANDevice:1 Device ISO/IEC 2934
35、1-8-2 UPnP WANDevice:1 Device ISO/IEC 29341-8-3 UPnP WANConnectionDevice:1 Device ISO/IEC 29341-8-4 UPnP WLANAccessPointDevice:1 Device ISO/IEC 29341-8-5 UPnP LANHostConfigManagement:1 Service ISO/IEC 29341-8-10 UPnP Layer3Forwarding:1 Service ISO/IEC 29341-8-11 UPnP LinkAuthentication:1 Service ISO
36、/IEC 29341-8-12 UPnP RadiusClient:1 Service ISO/IEC 29341-8-13 UPnP WANCableLinkConfig:1 Service ISO/IEC 29341-8-14 UPnP WANCommonInterfaceConfig:1 Service ISO/IEC 29341-8-15 UPnP WANDSLLinkConfig:1 Service ISO/IEC 29341-8-16 UPnP WANEthernetLinkConfig:1 Service ISO/IEC 29341-8-17 UPnP WANIPConnecti
37、on:1 Service ISO/IEC 29341-8-18 UPnP WANPOTSLinkConfig:1 Service ISO/IEC 29341-8-19 UPnP WANPPPConnection:1 Service ISO/IEC 29341-8-20 UPnP WLANConfiguration:1 Service ISO/IEC 29341-8-21 UPnP Printer:1 Device ISO/IEC 29341-9-1 UPnP Scanner:1.0 Device ISO/IEC 29341-9-2 UPnP ExternalActivity:1 Service
38、 ISO/IEC 29341-9-10 ISO/IEC 29341-12-11:2015(E)BS ISO/IEC 29341-12-11:2015 UPnP Document Title ISO/IEC 29341 Part UPnP Feeder:1.0 Service ISO/IEC 29341-9-11 UPnP PrintBasic:1 Service ISO/IEC 29341-9-12 UPnP Scan:1 Service ISO/IEC 29341-9-13 UPnP QoS Architecture:1.0 ISO/IEC 29341-10-1 UPnP QosDevice
39、:1 Service ISO/IEC 29341-10-10 UPnP QosManager:1 Service ISO/IEC 29341-10-11 UPnP QosPolicyHolder:1 Service ISO/IEC 29341-10-12 UPnP QoS Architecture:2 ISO/IEC 29341-11-1 UPnP QOS v2 Schema Files ISO/IEC 29341-11-2 UPnP QosDevice:2 Service ISO/IEC 29341-11-10 UPnP QosManager:2 Service ISO/IEC 29341-
40、11-11 UPnP QosPolicyHolder:2 Service ISO/IEC 29341-11-12 UPnP RemoteUIClientDevice:1 Device ISO/IEC 29341-12-1 UPnP RemoteUIServerDevice:1 Device ISO/IEC 29341-12-2 UPnP RemoteUIClient:1 Service ISO/IEC 29341-12-10 UPnP RemoteUIServer:1 Service ISO/IEC 29341-12-11 UPnP DeviceSecurity:1 Service ISO/I
41、EC 29341-13-10 UPnP SecurityConsole:1 Service ISO/IEC 29341-13-11 ISO/IEC 29341-12-11:2015(E)BS ISO/IEC 29341-12-11:2015ISO/IEC 29341-12-11:2015(E)BS ISO/IEC 29341-12-11:2015 INFORMATION TECHNOLOGY UPNP DEVICE ARCHITECTURE Part 12-11: Remote User Interface Device Control Protocol Remote User Interfa
42、ce Server Service 1. Scope This service definition is compliant with the UPnP Device Architecture version 1.0. This service is required for all Remote UI server devices. It is specified in: urn:schemas-upnp-org:service:RemoteUIServerDevice 2. Nor mative Refer ences The following documents, in whole
43、or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 29341-4-12, Information Technolog
44、y UPnP Device Architecture Part 4-12: Audio video Device Control Protocol Level 2 Content Directory Service IETF RFC 1738, Uniform Resource Locators (URL), Tim Berners-Lee, et. Al., December 1994. Available at: http:/www.ietf.org/rfc/rfc1738.txt. IETF RFC 3986, Uniform Resource Identifiers (URI): Ge
45、neric Syntax, Tim Berners-Lee, et al, 2005. Available at: http:/www.ietf.org/rfc/rfc3986.txt. ISO/IEC 29341-12-11:2015(E)BS ISO/IEC 29341-12-11:2015 3. Service Modeling Definitions 3.1. ServiceType The following service type identifies a service that is compliant with this template: urn:schemas-upnp
46、-org:service:RemoteUIServer:1. 3.2. State Variables Table 1: Service State Variables Variable Name Req. or Opt. 1Data Type Allowed Value Default Value 2Eng. Units UIListingUpdate O string Undefined Empty string N/A A_ARG_TYPE_DeviceProfile R string Undefined Empty string N/A A_ARG_TYPE_CompatibleUIs
47、 R string Undefined Empty string N/A A_ARG_TYPE_String R string Undefined Empty string N/A A_ARG_TYPE_URI O uri Undefined Empty string N/A A_ARG_TYPE_Int O int Undefined 0 N/A Non-standard state variables implemented by a UPnP vendor go here. X TBD TBD TBD TBD 1R = Required, O = Optional, X = Non-st
48、andard. 2Default values listed in this column are required. To specify standard optional values or to delegate assignment of values to the vendor, you must reference a specific instance of an appropriate table below. 3.2.1. UIListingUpdate The optional, evented UILisitingUpdate state variable inform
49、s control points of changes in the listing of user interfaces exposed by the Remote UI server. UILisitingUpdate is composed of a list of unique identifiers corresponding to user interfaces that have changed since the last event. Each line in the listing, including the last line, must be terminated with a carriage-return character and a linefeed character. UILisitingUpdate values may consist of an empty string when the event is issued by the Remote UI server for the first time. An example va
