1、Information technology UPnP Device Architecture Part 20-1: Audio video device control protocol Level 4 Audio video architecture BS ISO/IEC 29341-20-1:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology UPnP Device Architecture Part 20-1: Audi
2、o video device control protocol Level 4 Audio video architecture Technologies de linformation Architecture de dispositif UPnP Partie 20-1: Protocole de contrle de dispositif audio-vido Niveau 4 Architecture audio-vido INTERNATIONAL STANDARD ISO/IEC 29341-20-1 Reference number ISO/IEC 29341-20-1:2017
3、(E) First edition 2017-09 ISO/IEC 2017 National foreword This British Standard is the UK implementation of ISO/IEC 29341-20-1:2017. The UK participation in its preparation was entrusted to Technical Committee ICT/-/1, Information systems co-ordination. A list of organizations represented on this com
4、mittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017 ISBN 978 0 580 90841 5 ICS 35
5、.200 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017. Amendments/corrigenda issued since publication Date Text affected BRITISH STANDARD BS IS
6、O/IEC 29341201:2017Information technology UPnP Device Architecture Part 20-1: Audio video device control protocol Level 4 Audio video architecture Technologies de linformation Architecture de dispositif UPnP Partie 20-1: Protocole de contrle de dispositif audio-vido Niveau 4 Architecture audio-vido
7、INTERNATIONAL STANDARD ISO/IEC 29341-20-1 Reference number ISO/IEC 29341-20-1:2017(E) First edition 2017-09 ISO/IEC 2017 BS ISO/IEC 29341201:2017 ii ISO/IEC 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise specified, n
8、o part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs memb
9、er body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 29341-20-1:2017(E) BS ISO/IEC 29341201:2017 ii ISO/IEC 2017 All rights reserved COPYRIGHT PROT
10、ECTED DOCUMENT ISO/IEC 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without
11、 prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.or
12、g ISO/IEC 29341-20-1:2017(E) ISO/IEC 29341-20-1:2017(E) ISO/IEC 2017 All rights reserved iii CONTENTS 1 Scope . 1 1.1 Introductioin . 1 1.2 Goals . 1 1.3 Non-Goals 1 2 Normative references 1 3 Terms, definitions, symbols and abbreviations 2 4 Architectural Overview 3 5 Playback Architecture . 5 5.1
13、MediaServer . 6 5.1.1 ContentDirectory Service 7 5.1.2 ConnectionManager Service . 7 5.1.1 AVTransport Service . 7 5.2 MediaRenderer . 7 5.2.1 RenderingControl Service . 8 5.2.2 ConnectionManager Service . 8 5.2.3 AVTransport Service . 8 5.3 Control point . 8 5.3.1 2-Box model: Control point with De
14、coder 11 5.3.2 2-Box model: Control point with Content . 12 5.4 Tracking streams in the network 12 6 Example Playback Scenarios . 12 6.1 3-Box model: Isochronous-Push (IEC61883/IEEE1394) 13 6.2 3-Box model: Asynchronous-Pull (e.g. HTTP GET) . 14 6.3 2-Box model: Control point with Decoder using Isoc
15、hronous-Push (e.g. IEEE-1394) 15 6.4 2-Box model: Control point with Decoder using Asynchronous-Pull (e.g. HTTP GET) . 17 6.4.1 Minimal Implementation . 17 6.5 2-Box model: Control point with Content using Isochronous-Push (e.g. IEEE- 1394) 19 6.6 2-Box Model: Control point with Content using Asynch
16、ronous-Pull (e.g. HTTP GET) . 20 6.7 No ConnectionManager:PrepareForConnection() Action 20 7 Advanced Playback Scenarios . 21 7.1 Synchronized playback 22 7.2 Multi-streaming 24 8 Recording Architecture 26 8.1 Legacy recording mechanism . 26 8.2 Scheduled Recording 26 BS ISO/IEC 29341201:2017ISO/IEC
17、 29341-20-1:2017(E) iv ISO/IEC 2017 All rights reserved List of Figures Figure 1 Typical UPnP Device Interaction Model 3 Figure 2 UPnP AV Device Interaction Model 4 Figure 3 General Device Architecture aka the 3-Box model 5 Figure 4 General Interaction Diagram of the 3-Box model . 10 Figure 5 Contro
18、l point with Decoder 11 Figure 6 Control point with Content . 12 Figure 7 3-Box Model: Isochronous-Push transfer protocols 14 Figure 8 3-Box model:Asynchronus-Pull transfer protocol 15 Figure 9 2-Box model: Control point with Decoder using Isochronous-Push . 16 Figure 10 2-Box model: Control point w
19、ith Decoder using Asynchronous-Pull 17 Figure 11 2-Box model: Minimal Implementation . 18 Figure 12 2-Box model: Control point with Content using Isochronous-Push 19 Figure 13 2-Box model: Control point with Content using Asynchronous-Pull . 20 Figure 14 3-Box model: no ConnectionManager:PrepareForC
20、onnection() action . 21 Figure 15 Sequence diagram for setting up synchronized playback . 23 Figure 16 Multi-streaming playback sequence . 25 Figure 17 Relationship between a Schedule and the related Tasks 27 Figure 18 Out of bounds content creation by the ScheduledRecording service. 27 BS ISO/IEC 2
21、9341201:2017ISO/IEC 29341-20-1:2017(E) iv ISO/IEC 2017 All rights reserved List of Figures Figure 1 Typical UPnP Device Interaction Model 3 Figure 2 UPnP AV Device Interaction Model 4 Figure 3 General Device Architecture aka the 3-Box model 5 Figure 4 General Interaction Diagram of the 3-Box model .
22、 10 Figure 5 Control point with Decoder 11 Figure 6 Control point with Content . 12 Figure 7 3-Box Model: Isochronous-Push transfer protocols 14 Figure 8 3-Box model:Asynchronus-Pull transfer protocol 15 Figure 9 2-Box model: Control point with Decoder using Isochronous-Push . 16 Figure 10 2-Box mod
23、el: Control point with Decoder using Asynchronous-Pull 17 Figure 11 2-Box model: Minimal Implementation . 18 Figure 12 2-Box model: Control point with Content using Isochronous-Push 19 Figure 13 2-Box model: Control point with Content using Asynchronous-Pull . 20 Figure 14 3-Box model: no Connection
24、Manager:PrepareForConnection() action . 21 Figure 15 Sequence diagram for setting up synchronized playback . 23 Figure 16 Multi-streaming playback sequence . 25 Figure 17 Relationship between a Schedule and the related Tasks 27 Figure 18 Out of bounds content creation by the ScheduledRecording servi
25、ce. 27 ISO/IEC 29341-20-1:2017(E) ISO/IEC 2017 All rights reserved v Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC par
26、ticipate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmen
27、tal and nongovernmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described
28、 in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see http:/www.iso.org/directives). Attention is drawn to t
29、he possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on
30、 the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of Standard, the meaning of the ISO specific terms and ex
31、pressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary information ISO/IEC 29341201 was prepared by UPnP Forum and adopted, under the PAS procedure, by joint
32、technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. The list of all currently available parts of ISO/IEC 29341 series, under the general title Information technology UPnP Device Architecture, can be found on the ISO web site. BS
33、 ISO/IEC 29341201:2017ISO/IEC 29341-20-1:2017(E) vi ISO/IEC 2017 All rights reserved Introduction ISO and IEC draw attention to the fact that it is claimed that compliance with this document may involve the use of patents as indicated below. ISO and IEC take no position concerning the evidence, vali
34、dity and scope of these patent rights. The holders of -these patent rights have assured ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements of the holders of these p
35、atent rights are registered with ISO and IEC. Intel Corporation has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Intel Corporation Standards Licensing Department 5200 NE Elam Young Parkway MS: JFS-98 USA Hillsboro, Oregon 97124 Microsoft
36、Corporation has informed IEC and ISO that it has patent applications or granted patents as listed below: 6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be obtained from: Microsoft Corporation One Microsoft Way USA Redm
37、ond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US; 10/783 524 /US Information may be o
38、btained from: Microsoft Corporation One Microsoft Way USA Redmond WA 98052 Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Philips International B.V. IP 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339
39、 / US; 6 571 388 / US; 6 205 466 / US Information may be obtained from: Hewlett Packard Company 1501 Page Mill Road USA Palo Alto, CA 94304 Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Digital Media Busine
40、ss, Samsung Electronics Co. Ltd. 416 Maetan-3 Dong, Yeongtang-Gu, KR Suwon City 443-742 Huawei Technologies Co., Ltd. has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Huawei Technologies Co., Ltd. Administration Building, Bantian Longgang
41、 District Shenzhen China 518129 Qualcomm Incorporated has informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA USA 92121 Telecom Italia S.p.A.has informed IEC and ISO that it has patent app
42、lications or granted patents. Information may be obtained from: Telecom Italia S.p.A. Via Reiss Romoli, 274 Turin - Italy 10148 Cisco Systems informed IEC and ISO that it has patent applications or granted patents. Information may be obtained from: Cisco Systems, Inc. 170 West Tasman Drive San Jose,
43、 CA USA 95134 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and IEC shall not be held responsible for identifying any or all such patent rights. BS ISO/IEC 29341201:2017ISO/IEC 29341-20-1:20
44、17(E) viii ISO/IEC 2017 All rights reserved Original UPnP Document Reference may be made in this document to original UPnP documents. These references are retained in order to maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation and later by UP
45、nP Forum. The following table indicates the original UPnP document titles and the corresponding part of ISO/IEC 29341: UPnP Document Title ISO/IEC 29341 Part UPnP Device Architecture 1.0 ISO/IEC 29341-1:2008 UPnP Device Architecture Version 1.0 ISO/IEC 29341-1:2011 UPnP Device Architecture 1.1 ISO/I
46、EC 29341-1-1:2011 UPnP Device Architecture 2.0 ISO/IEC 29341-1-2 UPnP Basic:1 Device ISO/IEC 29341-2 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2008 UPnP AV Architecture:1 ISO/IEC 29341-3-1:2011 UPnP AVTransport:1 Service ISO/IEC 29341-3-10 UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11 UPnP Cont
47、entDirectory:1 Service ISO/IEC 29341-3-12 UPnP RenderingControl:1 Service ISO/IEC 29341-3-13 UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2 UPnP MediaRenderer:2 Device ISO/IEC 29341-3-2:2011 UPnP MediaServer:1 Device ISO/IEC 29341-3-3 UPnP AVTransport:2 Service ISO/IEC 29341-4-10:2008 UPnP AVTranspor
48、t:2 Service ISO/IEC 29341-4-10:2011 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2008 UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11:2011 UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12 UPnP RenderingControl:2 Service ISO/IEC 29341-4-13:2008 UPnP RenderingControl:2 Service ISO/IEC 293
49、41-4-13:2011 UPnP ScheduledRecording:1 ISO/IEC 29341-4-14 UPnP ScheduledRecording:2 ISO/IEC 29341-4-14:2011 UPnP MediaRenderer:2 Device ISO/IEC 29341-4-2 UPnP MediaServer:2 Device ISO/IEC 29341-4-3 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2008 UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4:2011 UPnP DigitalSecurityCamera:1 Device ISO/IEC 29341-5-1 UPnP DigitalSecurityCa
