1、PD CEN ISO/TS 14907-2:2016 Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance test for the on- board unit application interface (ISO/TS 14907-2:2016) BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06PD CEN ISO/TS 14907-2:2016 P
2、UBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN ISO/TS 14907-2:2016. It supersedes DD CEN ISO/TS 14907-2:2011 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems. A list of
3、 organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Lim
4、ited 2016 ISBN 978 0 580 92444 6 ICS 35.240.60; 43.040.15 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 August 2016. Amendments issued since publication
5、Date Text affected TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 14907-2 August 2016 ICS 43.040.15; 35.240.60 Supersedes CEN ISO/TS 14907-2:2011 English Version Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test fo
6、r the on- board unit application interface (ISO/TS 14907-2:2016) Perception du tlpage - Modes opratoires relatifs aux quipements embarqus et aux quipements fixes - Partie 2: Essai de conformit de linterface dapplication de lunit embarque (ISO/TS 14907- 2:2016) Elektronische Gebhrenerhebung - Testver
7、fahren fr straenseitige und fahrzeugseitige Einrichtungen - Teil 2: Konformittsprfungen fr die Anwendungsschnittstelle der fahrzeugseitigen Einrichtung (ISO/TS 14907-2:2016) This Technical Specification (CEN/TS) was approved by CEN on 26 June 2016 for provisional application. The period of validity
8、of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same
9、way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members a
10、re the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, R
11、omania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and
12、 by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TS 14907-2:2016 EPD CEN ISO/TS 14907-2:2016 CEN ISO/TS 14907-2:2016 (E) 3 European foreword This document (CEN ISO/TS 14907-2:2016) has been prepared by Technical Committee ISO/TC 204 “Intelligent transport systems” in colla
13、boration with Technical Committee CEN/TC 278 “Intelligent transport systems” the secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying
14、 any or all such patent rights. This document supersedes CEN ISO/TS 14907-2:2011. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
15、Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
16、Endorsement notice The text of ISO/TS 14907-2:2016 has been approved by CEN as CEN ISO/TS 14907-2:2016 without any modification. PD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E)Foreword iv Introduction v 1 Scope . 1 2 Normative references 4 3 Terms and definitions . 5 4 Abbreviated terms 6 5 OBU and
17、 supporting information . 8 5.1 ICS 8 5.2 IXIT 8 6 Testing requirements 9 6.1 Conceptual test architecture . 9 6.2 Conformance test system 10 6.2.1 Functionality of tester 10 6.2.2 Conformance testing 11 6.3 Test documentation .11 6.3.1 Tester 11 6.3.2 Test methods and test cases 11 6.3.3 Test resul
18、ts .11 Annex A (normative) Implementation conformance statement proforma .12 Annex B (normative) Implementation of extra information for testing (IXIT) proforma .25 Annex C (informative) OBU test cases 29 Annex D (informative) OBE conformance test procedures conducted in Japan .70 Bibliography .75 I
19、SO 2016 All rights reserved iii Contents PagePD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carrie
20、d out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS
21、O collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different
22、 approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be
23、 the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).
24、 Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles
25、in the Technical Barriers to Trade (TBT), see the following URL: Foreword Supplementary information. The committee responsible for this document is ISO/TC 204, Intelligent transport systems. This third edition cancels and replaces the second edition (ISO/TS 14907-2:2011), which has been technically
26、revised with the following changes: updated references to clauses and annexes in accordance with ISO 14906:2011/Amd1:2015; updated Annex D to reflect current situation in Japan. ISO/TS 14907 consists of the following parts, under the general title Electronic fee collection Test procedures for user a
27、nd fixed equipment: Part 1: Description of test procedures Part 2: Conformance test for the on-board unit application interfaceiv ISO 2016 All rights reservedPD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E) Introduction This part of ISO/TS 14907 describes tests that verify on-board unit (OBU) confor
28、mance of implementations of functions and data structures for electronic fee collection (EFC) applications. ISO 2016 All rights reserved vPD CEN ISO/TS 14907-2:2016PD CEN ISO/TS 14907-2:2016Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance test for the on-boa
29、rd unit application interface 1 Scope This part of ISO/TS 14907 describes tests that verify on-board unit (OBU) conformance of implementations of functions and data structures, as defined in the implementation conformance statement based on ISO 14906:2011/Amd1:2015, for electronic fee collection (EF
30、C) applications. After the tests of isolated data items and functions (C.2 to C.4), an example is given for testing of a complete EFC transaction (C.3). The scope of this part of ISO/TS 14907 comprises definitions of OBU conformance assessment tests of basic dedicated short-range communication (DSRC
31、) L7 functionality, EFC application functions, EFC attributes (i.e. EFC application information), the addressing procedures of EFC attributes and (hardware) components e.g. integrated circuit cards (ICC) and man-machine interfaces (MMI), the EFC transaction model, which defines the common elements a
32、nd steps of any EFC transaction, and the behaviour of the interface so as to support interoperability on an EFC-DSRC application interface level, see Figure 1. TECHNICAL SPECIFICATION ISO/TS 14907-2:2016(E) ISO 2016 All rights reserved 1PD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E) Figure 1 The E
33、FC application interface The purpose of this part of ISO/TS 14907 is to define tests that assess OBU capabilities, assess OBU behaviour, serve as a guide for OBU conformance evaluation and type approval, achieve comparability between the results of the corresponding tests applied in different places
34、 at different times, and facilitate communications between parties. Whereas, this part of ISO/TS 14907 defines examples of test cases for DSRC and EFC functionality in Annex C, it does not intend to specify a complete test suite for a certain implementation. To compose a test suite for a specific EF
35、C implementation, the test cases may have to be modified and new test cases may have to be defined and added in order for the conformance test to be complete. It can be useful to take into account the following considerations when defining a complete test suite small range: “exhaustive testing” of c
36、ritical interoperability/compatibility features, large range: testing of boundaries and random values, and composite types: testing of individual items in sequence or parallel. Figure 2 shows the overall procedure of conformance testing.2 ISO 2016 All rights reservedPD CEN ISO/TS 14907-2:2016ISO/TS
37、14907-2:2016(E) Figure 2 Conformance testing process Figure 3 gives a more detailed picture of the interface between the entity performing the conformance test and the supplier of the Device Under Test (DUT). By the EFC application specification, the implementation conformance statement proforma and
38、 the implementation extra information for testing proforma the supplier is requested to provide the DUT (OBU), containing the Implementation ISO 2016 All rights reserved 3PD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E) Under Test (IUT), as well as the documentation needed to perform the tests. More
39、 details on the content of the different documents are given in Clause 5 on OBU and supporting information. NOTE 1 The Device Under Test contains the Implementation Under Test. Figure 3 Documentation DUT supplier It is outside the scope of this part of ISO/TS 14907 to define tests that assess perfor
40、mance, robustness, and reliability of an implementation. NOTE 2 ISO/TS 14907-1 defines test procedures that are aimed at assessing performance, robustness and reliability of EFC equipment and systems. NOTE 3 The ISO/IEC 10373 series defines test methods for proximity, vicinity, integrated circuit(s)
41、 cards and related devices that may be relevant for OBUs that support such cards. Annex D provides an informative overview of Japanese OBE conformance tests that are based on the ISO/TS 14907 series, in order to illustrate how these can be applied in practice. 2 Normative references The following do
42、cuments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.4 ISO 2016 All rights re
43、servedPD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E) ISO 14906:2011/Amd1:2015, Electronic fee collection Application interface definition for dedicated short-range communication EN 12834:2003, Road transport and traffic telematics Dedicated short-range communication (DSRC) DSRC application layer 3
44、 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 access credentials trusted attestation or secure module that establishes the claimed identity of an object or application SOURCE: EN 15509:2014, 3.1 3.2 attribute addressable package of data cons
45、isting of a single data element or structured sequences of data element SOURCE: ISO 17575-1:, 3.2 3.3 authenticator data, possibly encrypted, that is used for authentication SOURCE: EN 15509:2014, 3.3 3.4 channel information transfer path SOURCE: ISO/IEC 7498-2:1989, 3.3.13 3.5 element DSRC director
46、y containing application information in the form of attributes SOURCE: ISO 14906:2011, 3.11, modified 3.6 implementation conformance statement statement of capabilities and options that have been implemented defining to what extent it is compliant with a given specification 3.7 implementation confor
47、mance statement proforma document, in the form of a questionnaire, which when completed for an implementation or system becomes an implementation conformance statement (ICS) SOURCE: ISO/IEC 9646-1:1994, 3.3.40 3.8 implementation extra information for testing statement containing all of the informati
48、on related to the implementation under test (IUT) and its corresponding system under test (SUT) which will enable the testing laboratory to run an appropriate test suite against that IUT SOURCE: ISO/IEC 19015:2000, 3.20 ISO 2016 All rights reserved 5PD CEN ISO/TS 14907-2:2016ISO/TS 14907-2:2016(E) 3
49、.9 implementation extra information for testing proforma document, in the form of a questionnaire, which when completed for an implementation under test (IUT) becomes an implementation extra information for testing (IXIT) SOURCE: ISO/IEC 9646-1:1994, 3.3.42 3.10 on-board equipment all required equipment on-board a vehicle for performing required EFC functions and communication services 3.11 on-board unit single electronic unit on-board a vehicle for pe
