1、PUBLISHED DOCUMENT PD CEN/TR 15135:2005 Welding Design and non-destructive testing of welds ICS 25.160.40 PD CEN/TR 15135:2005 This Published Document was published under the authority of the Standards Policy and Strategy Committee on 12 December 2005 BSI 12 December 2005 ISBN 0 580 46467 9 National
2、 foreword This Published Document is the official English language version of CEN/TR 15135:2005. The UK participation in its preparation was entrusted to Technical Committee WEE/46, Non-destructive examination, which has the responsibility to: aid enquirers to understand the text; present to the res
3、ponsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on requ
4、est to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI E
5、lectronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Published Document does not of itself confer immunity from legal obligations. Summary of p
6、ages This document comprises a front cover, an inside front cover, the CEN/TR title page, pages 2 to 20, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsT
7、ECHNICALREPORT RAPPORTTECHNIQUE TECHNISCHERBERICHT CEN/TR15135 June2005 ICS25.160.40 Englishversion WeldingDesignandnondestructivetestingofwelds SoudageConceptionetessaisnondestructifsdes assemblagessouds SchweienGestaltungvonSchweinhtenundihre zerstrungsfreiePrfung ThisTechnicalReportwasapprovedbyC
8、ENon15May2005.IthasbeendrawnupbytheTechnicalCommitteeCEN/TC121. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, S
9、lovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.CEN/TR1513
10、5:2005:E2 Contents Page Foreword 3 1 Scope.4 2 General4 3 Evaluation of a design for non-destructive testing 4 Bibliography.20 CEN/TR 15135:20053 Foreword This Technical Report (CEN/TR 15135:2005) has been prepared by Technical Committee CEN/TC 121 “Welding”, the secretariat of which is held by DIN.
11、 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Report: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit
12、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. CEN/TR 15135:20054 1 Scope This Technical Report is an information document and provides guidance for design and evaluation of various joint types and geometrical
13、configurations concerning the accessibility or ability of the weld to be examined with non-destructive testing methods. 2 General The application of non-destructive testing is highly dependent on the geometrical conditions (among others) of the component, the configuration and accessibility of the j
14、oint. This is particularly true for volumetric methods, radiographic and ultrasonic testing. The methods for surface testing visual, magnetic particle, penetrant and eddy current are primarily dependent on the surface conditions and accessibility. There are a very wide range of geometrical condition
15、s. This Technical Report shows examples for general non-destructive evaluation of welded joints in Table 1. More specific examples for the evaluation of different weld types representing various applications are shown in Table 2. The examples are intended to give guidance when planning for non-destr
16、uctive testing during design and fabrication. The examples in this Technical Report can be used for specifying non-destructive methods in accordance with EN 12062. 3 Evaluation of a design for non-destructive testing The following tables show the suitability of the non-destructive testing methods fo
17、r different types of joint configuration. Each serial number starts with a joint configuration, showing: a) the least acceptable configuration for testing; b) a better joint configuration for testing; c) the best configuration; d) more modifications. The letters following the serial number define th
18、e different test methods: visual testing VT; ultrasonic testing UT; radiographic testing RT; magnetic particle testing MT; penetrant testing PT. CEN/TR 15135:20055 The following conventions are also used: + implies that the method is applicable and that the results will satisfy ordinary requirements
19、; (+) implies that the method has a limited application. The method should be supplemented with another method; - implies that the method cannot be used or that the results are not sufficient. It should be noted that in ultrasonic testing the direction of the sound beam, and in radiography the direc
20、tion of the radiation beam relative to the anticipated imperfections, is very important. The metallurgical structure of a material, its thickness, surface finish and geometry can have a significant affect on the non-destructive test method. CEN/TR 15135:20056 Table 1 General evaluation of welded joi
21、nts Serial no. Example NDT method Remarks VT UT RT MT PT 1a + - (+) + + 1b + (+) + + + 1c + + + + + 1d + + + + + 2a + + + + + 2b + + + + + 3a + (+) (+) + + 3b + + (+) + + 4a + (+) (+) + + (to be continued) CEN/TR 15135:20057 Table 1 (concluded) Serial no. Example NDT method Remarks VT UT RT MT PT 4b
22、 + + + + + 5a + + + + + CEN/TR 15135:20058 Table 2 Evaluation of specific examples of welded joints Serial no. Example NDT method Remarks VT UT RT MT PT 1a + + (+) + + 1b + + + + + More suitable for examination than 1a2a + - - + + 2b + + + + + 3a 1 + + - + + 3b 2 + + + + + 3c + + + + + More suitable
23、 for examination than 3b (to be continued) CEN/TR 15135:20059 Table 2 (continued) Serial no. Example Welded joint NDT method Remarks VT UT RT MT PT 4a 1 2 - - + + - - + + (+) (+) Accessibility is restricted to one side 4b 1 2 3 - - - + + + - - - + + + (+) (+) (+) Accessibility is restricted to one s
24、ide 5a 1 2 - + + (+) (+) (+) + + + + (to be continued) CEN/TR 15135:200510 Table 2 (continued) Serial no. Example Welded joint NDT method Remarks VT UT RT MT PT 5b + + + + + 6a 1 2a 2b + + (+) + + + (+) + + *) + + (+) + + (+) Variant 2a: accessible from all surfaces Variant 2b: not accessible from i
25、nternal surfaces *) for double wall radiography take thickness into consideration 6b 1 2 3 + + + + (+) + + (+) (+) + + + + + + To be carried out prior to weld n 3 6c 1 2a 2b + + + + + + + + +*) + + + + + + Variant a: accessible from all surfaces Variant b: not accessible from internal surfaces *) fo
26、r double wall radiography take thickness into consideration (to be continued) CEN/TR 15135:200511 Table 2 (continued) Serial no. Example Welded joint NDT method Remarks VT UT RT MT PT 7a 1 2 + + - - (+) (+) + + + + RT needs access from both side 7b 1 2 + + - (+) (+) (+) + + + + RT needs access from
27、both side 8a + - (+) + + 8b + + + + + More suitable for welding than 8a 9a 1 2 + + + + + (+) + + + + (to be continued) CEN/TR 15135:200512 Table 2 (continued) Serial no. Example Welded joint NDT method Remarks VT UT RT MT PT 9b 1 2 3 + + + + + + + + + + + + + + + 10a 1 2 3 + + + -*) -*) - (+) (+) (+
28、) + + + + + + Prior to welding of reinforcement ring *) accessible from internal surface 10b + -*) (+) + + *) accessible from internal surface 11a + +*) (+) *) + + *) accessible from internal surface (to be continued) CEN/TR 15135:200513 Table 2 (continued) Serial no. Example Welded joint NDT method
29、 Remarks VT UT RT MT PT 11b + + + + + 12 + + + + + 13a + + - + + 13b 1a 1b 2 + + + + + + (+) - +*) + (+) + + (+) (+) Prior to welding weld 2 After welding weld 2 *) for double wall radiography take thickness into consideration 14a 1 2a 2b 3 + + - + (+) (+) (+) + (+) (+) - - + + - + + + - + 2a: prior
30、 to welding weld n3 2b: after welding weld n3 (to be continued) CEN/TR 15135:200514 Table 2 (continued) Serial no. Example Welded joint NDT method Remarks VT UT RT MT PT 14b 1 2a 2b 3 + + (+) + + + + + + + +*) +*) + + (+) + + + (+) + 2a: prior to welding weld n3 2b: after welding weld n3 *) double w
31、all radiography 15 1 2 + + (+) - (+) - + + + + 1: prior to welding weld n2 16a + + (+) + (+) 16b + + + + + (to be continued) CEN/TR 15135:200515 Table 2 (continued) Serial no. Example Welded joint NDT method Remarks VT UT RT MT PT 17a + +*) (+) + + *) more favourable prior to drilling 17b + + + + +
32、18a 1a 1b 2 + + + + +*) - (+) (+) *) (+) + + + + + + 1a: prior to welding of support plate 1b: after to welding of support plate *) restricted in the area of support plate 18b 1 2 + + + - (+) (+) + + + + (to be continued) CEN/TR 15135:200516 Table 2 (continued) Serial no. Example Welded joint NDT me
33、thod Remarks VT UT RT MT PT 19a 1 2 3 + + + + - + (+) (+) + + + + + + 19b 1 2 3 + + + + + + + (+) + + + + + + + 20a 1 2 + + (+) - (+) - + + + + 20b + + + + + (to be continued) CEN/TR 15135:200517 Table 2 (continued) Serial no. Example Welded joint NDT method Remarks VT UT RT MT PT 21a 1 2 + + - (+)
34、- - + + + + 21b 1 2 + + + + + + + + + + 22a + - - + + 22b + (+) + + + (to be continued) CEN/TR 15135:200518 Table 2 (continued) Serial no. Example Welded joint NDT method Remarks VT UT RT MT PT 23a + (+) (+) + + 23b + + + + + 24a + + (+) + + 24b + + (+) + + 25a + + (+) + + 25b + + + + + (to be conti
35、nued) CEN/TR 15135:200519 Table 2 (concluded) Serial no. Example Welded joint NDT method Remarks VT UT RT MT PT 26a 1 2 + + (+) + (+) (+) + + + + 26b + + + + + CEN/TR 15135:200520 Bibliography EN 12062, Non-destructive examination of welds General rules for metallic materials CEN/TR 15135:2005blankP
36、D CEN/TR 15135:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisio
37、ns British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambig
38、uity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that
39、 subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available fro
40、m the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national,
41、 European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 704
42、8. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: m
43、embershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in
44、the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise withou
45、t prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
