1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationField device tool (FDT) interfacespecification Part 503-2: Communication implementation for common object model IEC 61784 CP 3/4, CP 3/5 and CP 3/6PD CLC/TR 62453-503-2:2009Licen
2、sed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSINational forewordThis Published Document is the UK implementation of CLC/TR 62453-503-2:2009.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications: pro
3、cess measurement and control, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 97
4、8 0 580 62571 8ICS 25.040.40; 35.100.05; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Te
5、xt affectedBRITISH STANDARDPD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSITECHNICAL REPORT CLC/TR 62453-503-2 RAPPORT TECHNIQUE TECHNISCHER BERICHT November 2009 CENELEC European Committee for Electrotechnical Standardizat
6、ion Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TR 62453-503-2:200
7、9 E ICS 25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification - Part 503-2: Communication implementation for common object model - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 (IEC/TR 62453-503-2:2009) Spcification des interfaces des outils des dispositifs de terrain (F
8、DT) - Partie 503-2: Implmentation des communications pour le modle objet commun - CEI 61784 CP 3/4, CP 3/5 et CP 3/6 (CEI/TR 62453-503-2:2009) Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 503-2: Kommunikationsimplementierung mit dem allgemeinen Objektmodell (COM) - Kommunikationsprofil
9、e (CP) 3/4, 3/5 und 3/6 nach IEC 61784 (IEC/TR 62453-503-2:2009) This Technical Report was approved by CENELEC on 2009-10-01. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hu
10、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontro
11、lled Copy, (c) BSICLC/TR 62453-503-2:2009 - 2 - Foreword The text of document 65E/68/CDV, future edition 1 of IEC/TR 62453-503-2, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC
12、parallel vote and was approved by CENELEC as CLC/TR 62453-503-2 on 2009-10-01. This standard is to be used in conjunction with EN 62453-3xy series. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Technical Report IEC/TR 62453-503-2:2009 was approved by CENELEC as a Technical
13、 Report without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61784-2 NOTE Harmonized as EN 61784-2:2008 (not modified). _ PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:
14、14, Uncontrolled Copy, (c) BSI- 3 - CLC/TR 62453-503-2:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the
15、 edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62
16、453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidance EN 62453-1 2009 IEC 62453-2 2009 Field device tool (FDT) interface specification - Part 2: Concepts and detailed description EN 62453-2 2009 IEC/TR 62453-41 2009 Field device tool (FDT) interface specification
17、 - Part 41: Object model integration profile - Common object model CLC/TR 62453-41 2009 IEC 62453-303-2 2009 Field device tool (FDT) interface specification - Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 EN 62453-303-2 2009 _ PD CLC/TR 62453-503-2:2009Licensed
18、Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSI 2 TR 62453-503-2 IEC:2009(E) CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions, symbols, abbreviated terms and conventions 6 3.1 Terms and definitions 6 3.2 Symbols and abbreviat
19、ed terms.6 3.3 Conventions 7 3.3.1 Data type names and references to data types 7 3.3.2 Vocabulary for requirements7 4 Bus category 7 5 Access to instance and device data7 6 Protocol specific usage of general data types.7 7 Network management data types8 7.1 General .8 7.2 PNIO device address.8 7.3
20、Bus configuration FDTProfinetIOParameterSchema .8 8 Communication data types FDTProfinetIOCommunicationSchema.11 9 Channel parameter data types FDTProfinetIOChannelParameterSchema13 10 Device identification .14 10.1 Device type identification data types FDTProfinetIOIdentSchema.14 10.2 Topology scan
21、 data types DTMProfinetIODeviceSchema15 10.3 Scan identification data types FDTProfinetIOScanIdentSchema .15 10.4 Device type identification data types FDTProfinetIODeviceIdentSchema 17 10.5 XSLT Transformation 18 Bibliography26 Figure 1 Part 503-2 of the IEC 62453 series 5 Table 1 Protocol specific
22、 usage of general data types7 PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSITR 62453-503-2 IEC:2009(E) 5 INTRODUCTION This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) componen
23、ts for function control and data access within a client/server architecture. The specification is a result of an analysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly. With the integrat
24、ion of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and heteroge
25、neous control systems, typically in the area of the process industry, the unambiguous definition of engineering interfaces that are easy to use for all those involved is of great importance. A device-specific software component, called DTM (Device Type Manager), is supplied by the field device manuf
26、acturer with its device. The DTM is integrated into engineering tools via the FDT interfaces defined in this specification. The approach to integration is in general open for all kind of fieldbusses and thus meets the requirements for integrating different kinds of devices into heterogeneous control
27、 systems. Figure 1 shows how IEC/TR 62453-503-2 is aligned in the structure of IEC 62453 series. Part 502Communicationimplementationfor common object model IEC 61784 CP 3/4,CP 3/5 and CP 3/6Part 503-2 Figure 1 Part 503-2 of the IEC 62453 series PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/
28、EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSI 6 TR 62453-503-2 IEC:2009(E) FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 503-2: Communication implementation for common object model IEC 61784 CP 3/4, CP 3/5 and CP 3/6 1 Scope IEC/TR 62453-503-2, which is a technical re
29、port, provides information for integrating the PROFINET1technology into the implementation of the FDT interface specification (IEC/TR 62453-41). This part of IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it. 2 Normative r
30、eferences The following referenced documents are indispensable for the application of this specification. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies IEC 62453-1:2009,Field Device Tool
31、(FDT) interface specification Part 1: Overview and guidance IEC 62453-2:2009,Field Device Tool (FDT) interface specification Part 2: Concepts and detailed description IEC/TR 62453-41:2009, Field Device Tool (FDT) interface specification Part 41: Object model integration profile Common object model I
32、EC 62453-303-2:2009, Field Device Tool (FDT) interface specification Part 303-2: Communication profile integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 3 Terms, definitions, symbols, abbreviated terms and conventions 3.1 Terms and definitions For the purpose of this document, the terms and definiti
33、ons given in IEC 62453-1 and IEC 62453-2 apply. 3.2 Symbols and abbreviated terms For the purpose of this document, the symbols and abbreviations given in IEC 62453-1, IEC 62453-2 and the following apply. GSDML Generic Station Description Markup Language DCP Discovery and basic Configuration Protoco
34、l 1PROFINET is the trademark of PROFIBUS Nutzerorganisation e.V. (PNO). PNO is a non-profit trade organization to support the fieldbus PROFIBUS. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder
35、 or any of its products. Compliance to this profile does not require use of the registered trademark. Use of the trademark PROFIBUS and PROFINET requires permission of the trade name holder. PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontroll
36、ed Copy, (c) BSITR 62453-503-2 IEC:2009(E) 7 3.3 Conventions 3.3.1 Data type names and references to data types The conventions for naming and referencing of data types are explained in IEC 62453-2 Clause A.1 3.3.2 Vocabulary for requirements The following expressions are used when specifying requir
37、ements. Usage of “shall” or “Mandatory” No exceptions allowed. Usage of “should” or “Recommended” Strong recommendation. It may make sense in special exceptional cases to differ from the described behavior. Usage of “can or “Optional Function or behavior may be provided, depending on defined conditi
38、ons. 4 Bus category IEC 61784 CP 3/3 protocol is identified in the attribute busCategory of the BusCategory element by the identifiers, as specified in IEC 62453-303-2. 5 Access to instance and device data Used at methods: IDtmParameter:GetParameters() IDtmParameter:SetParameters() These methods sha
39、ll provide access to at least to all parameters defined in IEC 62453-303-2. 6 Protocol specific usage of general data types Table 1 shows how general data types are used with IEC 61784 CP 3/3 devices. Table 1 Protocol specific usage of general data types Attribute Description for use fdt:address fdt
40、:protocolId fdt:deviceTypeId fdt:deviceTypeInformation fdt:deviceTypeInformationPath fdt:manufacturerId fdt:semanticId fdt:applicationDomain fdt:tag All these attributes of the FDTDatatype schema are used as defined in IEC 62453-303-2. PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE
41、CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSI 8 TR 62453-503-2 IEC:2009(E) 7 Network management data types 7.1 General The data types specified in this clause are used at following methods: IDtmParameter:GetParameters IDtmParameter:SetParameters 7.2 PNIO device address The address in
42、formation of a PNIO device is handled in the element. 7.3 Bus configuration FDTProfinetIOParameterSchema PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSITR 62453-503-2 IEC:2009(E) 9 PD CLC/TR 62453-503-2:2009Licensed Copy:
43、Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSI 10 TR 62453-503-2 IEC:2009(E) PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSITR 62453-503-2 IEC:2009(E) 11 8 Communication data types FDT
44、ProfinetIOCommunicationSchema The data types specified in this clause are used with the methods of IFdtCommunication. PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSI 12 TR 62453-503-2 IEC:2009(E) PD CLC/TR 62453-503-2:2009
45、Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSITR 62453-503-2 IEC:2009(E) 13 9 Channel parameter data types FDTProfinetIOChannelParameterSchema The data types specified in this clause are used with the following methods: IFdtChannel:GetChannelParam
46、eters() IFdtChannel:SetChannelParameters() PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSI 14 TR 62453-503-2 IEC:2009(E) 10 Device identification 10.1 Device type identification data types FDTProfinetIOIdentSchema PD CLC/T
47、R 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSITR 62453-503-2 IEC:2009(E) 15 10.2 Topology scan data types DTMProfinetIODeviceSchema Used at IDtmEvents:OnScanResponse() The XML document describes one entry, , in the list of scanne
48、d devices. 10.3 Scan identification data types FDTProfinetIOScanIdentSchema This schema defines the XML document provided by a scan response of a network. PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSI 16 TR 62453-503-2 I
49、EC:2009(E) PD CLC/TR 62453-503-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/04/2010 03:14, Uncontrolled Copy, (c) BSITR 62453-503-2 IEC:2009(E) 17 10.4 Device type identification data types FDTProfinetIODeviceIdentSchema This subclause defines data types that are used to protocol specific information for device types. PD CLC/TR 62453-503-2:2009Licensed Copy: W
