1、Car multimedia systems and equipment Drive monitoring system Part 1: General PD IEC/TS 630331:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06IEC TS 63033-1 Edition 1.0 2017-05 TECHNICAL SPECIFICATION Car multimedia systems and equipment Drive monitoring system
2、 Part 1: General IEC TS 63033-1:2017-05(en) colour inside National foreword This Published Document is the UK implementation of IEC TS 630331:2017. The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video and multimedia systems and equipment. A list of organ
3、izations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 20
4、17 ISBN 978 0 580 96520 3 ICS 33.160.99; 43.040.15 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017. Amendments/corrigenda issued since publi
5、cation Date Text affected PUBLISHED DOCUMENT PD IEC/TS 630331:2017 IEC TS 63033-1 Edition 1.0 2017-05 TECHNICAL SPECIFICATION Car multimedia systems and equipment Drive monitoring system Part 1: General IEC TS 63033-1:2017-05(en) colour inside PD IEC/TS 630331:2017 THIS PUBLICATION IS COPYRIGHT PROT
6、ECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs
7、member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office
8、Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic an
9、d related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone appl
10、ication for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC pu
11、blications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications
12、released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the In
13、ternational Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications
14、 of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. PD IEC/TS 630331:2017 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017
15、IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Commi
16、ttee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 1
17、1 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologie
18、s. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consultin
19、g the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a varie
20、ty of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available o
21、nline and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrote
22、chnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86
23、 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC TS 63033-1 Edition 1.0 2017-05 TECHNICAL SPECIFICATION Car multimedia systems and equipment Dr
24、ive monitoring system Part 1: General INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.160.99; 43.040.15 ISBN 978-2-8322-4282-7 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside PD
25、 IEC/TS 630331:2017 2 IEC TS 63033-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviated terms 7 3.1 Terms and definitions 7 3.2 Abbreviated terms . 7 4 System model 7 4.1 General . 7 4.2 Number of cameras and camera field of v
26、iew 8 4.3 Method for projecting visual image to 3D projection surface 9 4.4 Visualizing the projection image at free eye point 10 4.5 Free eye point capability . 11 5 Camera configuration 11 5.1 Camera . 11 5.2 Lens distortion data 11 5.2.1 Distortion data of rotationally symmetric lens . 11 5.2.2 D
27、istortion data of non-rotationally symmetric lens 12 5.3 Optical axis shift data . 13 6 Rendering 14 6.1 General . 14 6.2 Composite view data . 14 6.2.1 3D projection surface data . 14 6.2.2 Capture size 14 6.2.3 Conversion of eye point parameter 15 6.2.4 Virtual 3D image car model data 16 6.2.5 Gui
28、de line and bitmap data 17 6.2.6 Layout data and layer setting data . 18 Annex A (informative) Camera mounting to the car 20 A.1 Camera mounting position 20 A.2 Camera mounting height . 20 A.3 Camera mounting angle 20 Annex B (informative) Camera field of view 22 Annex C (informative) Camera calibra
29、tion 23 Annex D (informative) Display 24 D.1 Display specification data . 24 D.2 Composite view change mode . 24 Annex E (informative) Time behaviour . 25 E.1 Start-up time . 25 E.2 Frame rate 25 E.3 Latency . 25 Bibliography 26 Figure 1 System model for the drive monitoring system . 8 Figure 2 Hori
30、zontal angle of view of the camera . 8 PD IEC/TS 630331:2017 2 IEC TS 63033-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviated terms 7 3.1 Terms and definitions 7 3.2 Abbreviated terms . 7 4 System model 7 4.1 General . 7 4.
31、2 Number of cameras and camera field of view 8 4.3 Method for projecting visual image to 3D projection surface 9 4.4 Visualizing the projection image at free eye point 10 4.5 Free eye point capability . 11 5 Camera configuration 11 5.1 Camera . 11 5.2 Lens distortion data 11 5.2.1 Distortion data of
32、 rotationally symmetric lens . 11 5.2.2 Distortion data of non-rotationally symmetric lens 12 5.3 Optical axis shift data . 13 6 Rendering 14 6.1 General . 14 6.2 Composite view data . 14 6.2.1 3D projection surface data . 14 6.2.2 Capture size 14 6.2.3 Conversion of eye point parameter 15 6.2.4 Vir
33、tual 3D image car model data 16 6.2.5 Guide line and bitmap data 17 6.2.6 Layout data and layer setting data . 18 Annex A (informative) Camera mounting to the car 20 A.1 Camera mounting position 20 A.2 Camera mounting height . 20 A.3 Camera mounting angle 20 Annex B (informative) Camera field of vie
34、w 22 Annex C (informative) Camera calibration 23 Annex D (informative) Display 24 D.1 Display specification data . 24 D.2 Composite view change mode . 24 Annex E (informative) Time behaviour . 25 E.1 Start-up time . 25 E.2 Frame rate 25 E.3 Latency . 25 Bibliography 26 Figure 1 System model for the
35、drive monitoring system . 8 Figure 2 Horizontal angle of view of the camera . 8 IEC TS 63033-1:2017 IEC 2017 3 Figure 3 Vertical angles of view of the camera . 9 Figure 4 3D projection surface . 10 Figure 5 Projecting to 3D projection surface . 10 Figure 6 Distortion data of a rotationally symmetric
36、 lens 11 Figure 7 Distortion data format of a rotationally symmetric lens 12 Figure 8 Distortion data of a non-rotationally symmetric lens . 12 Figure 9 Distortion data format of a non-rotationally symmetric lens . 13 Figure 10 Texture normalization coordinate at the centre of each optical axis . 13
37、 Figure 11 The format of optical shift data . 14 Figure 12 3D projection surface data . 14 Figure 13 Capture specification data format . 15 Figure 14 Camera angle in conversion of eye point 15 Figure 15 Camera position/scaling in conversion of eye point 16 Figure 16 Virtual 3D image car model at ori
38、ginal dimension . 16 Figure 17 Virtual 3D image car model at real dimension . 17 Figure 18 Guide line and bitmap data . 17 Figure 19 Camera image coordinate system 18 Figure 20 Screen coordinate system 18 Figure 21 Object coordinate system . 19 Figure 22 Layout data and layer setting data 19 Figure
39、A.1 Camera mounting position 20 Figure A.2 Camera mounting height . 20 Figure A.3 Camera mounting angle 21 Figure C.1 Camera calibration . 23 PD IEC/TS 630331:2017 4 IEC TS 63033-1:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CAR MULTIMEDIA SYSTEMS AND EQUIPMENT DRIVE MONITORING SYSTEM
40、Part 1: General FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standa
41、rdization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparatio
42、n is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with
43、the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjec
44、ts since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical c
45、ontent of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent pos
46、sible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide confor
47、mity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its direct
48、ors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising
49、out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or
